Denon DVD-2910 Operating Instructions Manual page 30

ENGLISH
w When "HDMI AUDIO SETUP" is selected:
2CH (Channel) (Factory default)
The audio signals are output from the HDMI terminal with a down-
mixed to 2 channel.
MULTI(NORMAL)
The multi-channel audio signals are output from the HDMI terminal
with a bit-stream.
MULTI(LPCM)
The multi-channel audio signals are output from the HDMI terminal
with a linear PCM.
B When "MULTI (LPCM)" is selected, use the • and ª cursor
buttons to select the item to be set, then press the ENTER
button.
SPEAKER CONFIGURATION
Use this to select the types of the different speakers.
CHANNEL LEVEL
Use this to adjust the output level of the different speakers.
DELAY TIME
Use this to set the distance from the different speakers to the
listening position.
To exit the HDMI SPEAKER SETUP mode.
Use the ª cursor button to select "DIGITAL INTERFACE SETUP"
then press ENTER button.
B When "SPEAKER CONFIGURATION" is selected, use the • and
ª cursor buttons to select the speaker to be set then press the
ENTER button.
• The type of speaker used for the front speakers, center speaker,
3
subwoofer and surround speakers can be set. Use the • and ª cursor
buttons to select the speaker type, then press the ENTER button.
LARGE
Select this when a large speaker is connected.
SMALL
Select this when a small speaker is connected.
NONE
Select this when no speaker is connected.
YES
Select this when a subwoofer is connected.
NO
Select this when no subwoofer is connected.
Press the RETURN button to return to the "HDMI SPEAKER
SETUP" menu.
B When "CHANNEL LEVEL" is selected, use the • and ª cursor
buttons to select the speaker to be adjusted, then use the
cursor buttons to set the level.
1
TEST TONE
• Use the
0
Adjust so that the volume of the test tones output from the different
speakers sounds the same.
• The volume level output from the front speakers (left and right
channels), center speaker, surround speakers (left and right
channels) and subwoofer can be adjusted.
• The volume level can be adjusted between 0 and -10 dB in steps of
1 dB.
Press the RETURN button to return to the "HDMI SPEAKER
SETUP" menu.
30
and cursor buttons to select auto or manual.
1
D I G I T A L I NTERF ACE S E T UP
HDM I/ DV I BLACK L EVEL
HDM I AUDIO S E TUP
E X I T SE TUP
SE L EC T :
HDMI SPEAKER SE TUP
SPE AK ER CONF I GURAT I ON
CHANNE L L E VE L
DE L AY T I ME
DIGITAL INTERFACE SETUP
SE L EC T :
Remote control unit
HDMI SPE AKE R SE TUP
SE L EC T :
and
0
The display depends on the connected device.
(Indicates whether
connected)
HDMI SPE AKE R SE TUP
SE L EC T :
2CH
MULTI(NORMAL)
MULTI(LPCM)
DE C I S I ON : ENT ER BUT TON
DE C I S I ON : ENTE R BUT TON
Remote control unit
SPE AK ER CONF I GURAT I ON
F RONT SP L ARGE
CENT ER SP L ARGE
SUBWOOF ER YES
SURROUND SP L ARGE
DE C I S I ON : ENTER BUT TON
or not speakers are
CHANNEL LEVEL
T E S T TONE OF F
0 dB
F RONT L CH
CENT ER 0 dB
F RONT RCH 0 dB
0 dB
SURROUND RCH
SURROUND LCH 0 dB
SUBWOOF ER 0 dB
DEC I S I ON : ENT ER BUT TON