Denon DVD-2910 Operating Instructions Manual page 29

When "DIGITAL INTERFACE SETUP" is selected
1
See page 23.
Use the • and ª cursor buttons to select the desired setting, then press
the ENTER button.
HDMI/DVI BLACK LEVEL
2
Switches the digital RGB video level (data range) of the HDMI and the
DVI-D terminals.
HDMI AUDIO SETUP
Use this to adjust for the audio signals from the HDMI terminal.
Use the • and ª cursor buttons to select the desired setting, then press
the ENTER button.
q When "HDMI/DVI BLACK LEVEL" is selected:
NORMAL (Factory default)
Signals are output from the HDMI and the DVI-D terminals with a
digital RGB video level (data range) of 16(black) to 235(white).
3 ENHANCED
Signals are output from the HDMI and the DVI-D terminals with a
digital RGB video level (data range) of 0(black) to 246(white).
When the HDMI and the DVI-D terminals are connected , the black
may seem to stand out, depending on the TV or the Monitor you
are using. In this case, set this to "ENHANCED".
When select "HDMI Y Cb Cr" under "HDMI/DVI SELECT", will
have no effect. (See page 49.)
1
1, 2, 3
1
D I G I TA L I NTERF ACE S E T UP
HDM I/ DV I BLACK LEVEL
HDM I AUDIO S E TUP
E X I T SE TUP
SE L EC T : DE C I S I ON : ENTE R BUT TON
Remote control unit Remote control unit
D I G I T A L I NTERF ACE S E T UP
HDM I/ DV I BLACK L EVE L
HDM I AUDIO S E TUP
E X I T SE TUP
SE L EC T : DE C I S I ON : ENTE R BUT TON
ENGLISH
NORMAL
2CH
NORMAL
ENHANCED
29