Manual Update Process: Installing A Device Software Update - Iomega 34337 - Home Media Network Hard Drive NAS Server User Manual

66
Software Updates
The Software Updates page identifies the Home Media Network Hard Drive software status and provides the ability to update the software for the Home
Media Network Hard Drive.
This software is protected by RSA BSAFE technology.

Manual update process: installing a device software update

1. In the table listing the current software installed on your Home Media Network Hard Drive, click
2. If an update is available, the Status column will state that a software update is available with a link. Download the update file to your local computer.
3. To retrieve the update, click
4. In the Add Software pop-up window, if an update is available, there will be a link to download the appropriate update for your Home Media Network
Hard Drive. Click the link, follow the instructions on the download site page, and download the software update to your local computer.
5. Once downloaded, click Browse to select the update, and then click Upload to continue.
When the update is uploaded to the Home Media Network Hard Drive, the Status column will say Ready to apply.
6. Click Apply all pending updates to apply the update or updates. The software updates will be applied to your Home Media Network Hard Drive. If
you want to remove the update without applying changes, click
The Home Media Network Hard Drive restarts once the software is installed. You should not power down the Home Media Network Hard Drive during the
installation process as this can damage the Home Media Network Hard Drive. If multiple updates are ready, all of them will be applied, requiring only
one reboot.
The Home Media Network Hard Drive will be temporarily inaccessible during the software update. Be sure no critical files are being
accessed.
Add Software.
Iomega® Home Media Network Hard Drive Cloud Edition
in the Action column.
in the Action column to check for updates.