Manual Update Process: Installing A Device Software Update - Iomega StorCenter px6-300d User Manual

83
Software Updates
The Software Updates page identifies the Iomega StorCenter px6-300d software status and provides the ability to update the software for the Iomega
StorCenter px6-300d.
This software is protected by RSA BSAFE technology.

Manual update process: installing a device software update

1. In the table listing the current software installed on your Iomega StorCenter px6-300d, click
2. If an update is available, the Status column will state that a software update is available with a link. Download the update file to your local computer.
3. To retrieve the update, click
4. In the Add Software pop-up window, if an update is available, there will be a link to download the appropriate update for your Iomega StorCenter px6-
300d. Click the link, follow the instructions on the download site page, and download the software update to your local computer.
5. Once downloaded, click Browse to select the update, and then click Upload to continue.
When the update is uploaded to the Iomega StorCenter px6-300d, the Status column will say Ready to apply.
6. Click Apply all pending updates to apply the update or updates. The software updates will be applied to your Iomega StorCenter px6-300d. If you
want to remove the update without applying changes, click
The Iomega StorCenter px6-300d restarts once the software is installed. You should not power down the Iomega StorCenter px6-300d during the
installation process as this can damage the Iomega StorCenter px6-300d. If multiple updates are ready, all of them will be applied, requiring only one
reboot.
The Iomega StorCenter px6-300d will be temporarily inaccessible during the software update. Be sure no critical files are being
accessed.
Add Software.
in the Action column.
Iomega StorCenter px6-300d
in the Action column to check for updates.