Adding And Modifying Copy Jobs; Adding Copy Jobs - Iomega 34337 - Home Media Network Hard Drive NAS Server User Manual

44

Adding Copy Jobs

The page describes how to:
Add and Modify Copy Jobs
Setting From Information
Setting To Information
Setting a Schedule

Adding and Modifying Copy Jobs

1. On the Copy Jobs page, click
2. Enter a name for the Copy Job.
3. The Overwrite Setting determines what happens to files in the destination location if they have the same name as those in the source location. Select
one of the following values from the Overwrite Setting drop-down menu:
Overwrite and don't delete — Files in the destination location are overwritten with files from the source location. Any files in the destination
location that are not in the source location are preserved.
Overwrite and delete — Files in the destination location are overwritten with files from the source location. Any files in the destination location
that are not in the source location are deleted. The destination location becomes an exact copy of the source location.
Don't overwrite — Only files in the source location that are not in the destination location are copied. No files are overwritten in the destination
location.
4. Optionally, you may select to run your Copy Job when the QuikTransfer button is pressed. For more information on QuikTransfer, refer to the
QuikTransfer page.
From: Settings
1. In the From: section, click
Device Name or IP address in the text box, or select a device from the list. If a connected device is not listed, click the Refresh button.
2. Click OK to save your selection or click Cancel.
3. The Protocol drop-down menu displays if the source device is different from the device you are currently accessing; for example, it could be a separate
NAS device on your network. From the Protocol drop-down menu, choose one of the following:
Windows File Sharing — The default value in the menu is Windows File Sharing and in most cases you should accept the default value. For more
information, refer to
4. Enter a valid username and password to provide access to folders on this NAS device, if applicable.
5. To select a specific folder, click
select one of the following options for the Copy Job from the drop-down menu:
The selected folder and its contents — copies the contents of the selected folder. If the destination is a folder, a new folder will be created for
each source folder. If the destination is Top Level, a new top-level folder is created on the destination device for each source folder.
Only the contents of the selected folder — copies the contents of the selected folder. If the destination is a folder, the files and folders in the
selected folder are copied directly to it (the source folder name is not copied). If the destination is Top Level, a new top-level folder is created
on the destination device for each folder in the source folder.
6. By selecting Shares, you choose to copy All Shares, in which all files on the device are copied. Any files not contained in a folder are not copied. If the
destination is a folder, a new folder will be created for each source folder. If the destination is Top Level, a new top-level folder is created on the
destination device for each source folder.
7. Click OK to save your selection or click Cancel.
8. Click Apply to save your changes.
To: Settings
1. In the To: section, click
or IP address in the text box, or from the scroll down menu, select a device from the list. If a connected device is not listed, click the Refresh button.
2. Click OK to save your selection or click Cancel.
3. The Protocol drop-down menu displays if the source device is different from the device you are currently accessing; for example, it could be a separate
NAS device on your network. From the Protocol drop-down menu, choose one of the following:
Windows File Sharing - The default value in the menu is Windows File Sharing and in most cases you should accept the default value. For more
information, refer to
4. Enter a valid username and password to provide access to folders on this NAS device, if applicable.
5. To select a specific folder, click
from a Share to copy your files.
6. Click OK to save your selection or click Cancel.
7. Click Apply to save your changes.
Setting a Schedule
1. To set a schedule, expand the Schedule section.
2. In the Schedule section, select Enable Schedule for Copy Job.
3. Select the days you want the Copy Job to run, or select All Days to run the Copy Job every day.
4. Click to select a start time. Click Done to save your time selection.
5. Click Apply to save your changes. The new Copy Job displays on the Copy Jobs page.
. A Copy Job is added to the top of the list and the Information section displays.
to select a source location. This is the location where the files you want to copy are kept. In the dialog, enter the
Windows File Sharing.
to select a source location for the What to copy: section. In the Copy dialog box, select all Shares or a folder, and
to select a destination location. This is the location where you want your files copied. In the dialog, enter the Device Name
Windows File Sharing.
to select a destination location for the Copy to here: section. In the Copy to here dialog, select a Share or a folder
Iomega® Home Media Network Hard Drive Cloud Edition