Connecting Home Media Network Hard Drive - Iomega 34337 - Home Media Network Hard Drive NAS Server User Manual

5
Connecting the Home Media Network Hard Drive
Check Package Contents
Verify that the box contains the following items:
Home Media Network Hard Drive (models may vary)
External Power Supply (models may vary)
Solutions CD and Quick Start Guide
Ethernet Cable
Package contents may vary.
Connecting the Home Media Network Hard Drive
Initial Setup
If you have purchased more than one Home Media Network Hard Drive, complete all steps on one device before setting up additional devices.
1. Use the included network cable to connect the device to a network hub, switch or directly to a computer.
2. Connect the included power cord to the back of the device and a power socket or Uninterruptible Power Supply (UPS).
3. Your Home Media Network Hard Drive should power on automatically.
4. Start your computer, wait for the operating system to load, and then insert the CD.
5. For best results, use a computer that is connected to the same router, hub, or switch as the device.
If the software doesn't run automatically, double click on the CD icon, then double-click the Start icon.
6. Install the Iomega Storage Manager software.
Once the installation completes, the Iomega Storage Manager icon will appear in the System Tray (Windows) or Menu Bar (Mac). The Iomega Storage
Manager will automatically scan your network and connect to available Shares.
If you receive a message from your operating system's firewall alerting you of network activity, be sure to unblock communications.
Mac Users: Shares on the Home Media Network Hard Drive will mount and appear on the Mac Desktop.
PC Users: Shares on the Home Media Network Hard Drive will automatically be assigned a drive letter and will be available in the Network Drives section
under My Computer.
Iomega® Home Media Network Hard Drive Cloud Edition