User Interface: Log In Issues; User Interface: Media Issues - Iomega StorCenter ix2-200 Release Notes

Known issues and limitations

User Interface: Log in issues

An FTP user name cannot contain a space

User Interface: Media issues

No indication of file transfer complete in Picture Transfer Protocol
Chinese media name does not display in iTunes
Wireless video surveillance camera is not detected
Two cameras cannot transfer pictures simultaneously to the device
18 Iomega StorCenter Network Storage Release Notes version 3.2.3
3763
Description: If an FTP user name contains a space, the user cannot successfully log
in to the device using the FTP client.
Affected Software Releases: 2.6, 2.6.13, 3.0, 3.1.10, 3.1.12, 3.1.14, 3.2.3
Affected Hardware Platforms: ix2-200
Workaround: Specify an FTP user name without blank spaces.
Description: If the Iomega StorCenter is set to Enable Picture Transfer and Remove
Copied Pictures From Camera, when a camera is connected, the camera's LCD
might not display a confirmation that the file transfer has completed.
Affected Software Releases: 2.6, 2.6.13, 3.0, 3.1.10, 3.1.12, 3.1.14, 3.2.3
Affected Hardware Platforms: All
Workaround: —
Description: The Iomega StorCenter Media Server does not support the Chinese
ID3 tag encoding with non-unicode formatting.
Affected Software Releases: 2.6, 2.6.13, 3.0, 3.1.10, 3.1.12, 3.1.14, 3.2.3
Affected Hardware Platforms: All
Workaround: To use Chinese ID3 tag encoding, it is recommended that you use
iTunes to convert it from GBK to Unicode.
Description: After connecting an Axis wireless UPnP camera to a network, the
camera can be seen through the camera's configuration software, but the Iomega
StorCenter Manager returns a message stating, "No supported cameras can be
found."
Affected Software Releases: 2.6, 2.6.13, 3.0, 3.1.10, 3.1.12, 3.1.14, 3.2.3
Affected Hardware Platforms: All
Workaround: At this time, only wired Axis UPnP cameras are supported.
Description: If you are transferring pictures from a camera and then connect a
second camera to simultaneously transfer pictures, the first camera stops
transferring pictures.
Affected Software Releases: 2.6, 2.6.13, 3.0, 3.1.10, 3.1.12, 3.1.14, 3.2.3
Affected Hardware Platforms: All
Workaround: It is recommended that you attach only one camera at a time.
1579
1478
3515
5998