Shutting Down The Attached Head - Alamo FC-0002 Operator's Manual

Boom arm mower

Table of Contents

Many varied objects, such as wire, cable, rope, or chains, can become entangled in the

operating parts of the mower head. These items could then swing outside the housing at

greater velocities than the blades. Such a situation is extremely hazardous and could result

in serious injury or even death. Inspect the cutting area for such objects before mowing. Remove any like

object from the site. Never allow the cutting blades to contact such items.

9.4 Shutting Down the Attached Head

To shut down attached boom head, first bring the

tractor to a complete stop. Keep the engine speed

at normal operating speed of 540 RPM, and push

the Motor Switch IN to the Stop position. The

mower head will come to a complete stop with in 15

seconds.

Park the tractor on a level surface, place the

transmission in park or neutral and apply the

parking brake, shut down the engine, remove the

key, and wait for all motion to come to a complete

stop before exiting the tractor.

BEFORE leaving the tractor seat, always engage the brake and/or set

the tractor transmission in parking gear, disengage the PTO, stop the

engine, remove the key, and wait for all moving parts to stop. Place the

tractor shift lever into a low range or parking gear to prevent the tractor

from rolling. Never dismount a Tractor that is moving or while the engine

is running. Operate the Tractor controls from the tractor seat only.

SAMURAI 12/08

OPERATION

OPS-B- 0011_A

Operation Section 3-41

(SGM-6)

(SG-9)

Table of Contents

Samurai