Table of Contents
Advertisement
MAINTENANCE
FLAIL AXE HEAD
BELT TENSION
When installing new belts, tighten belts to obtain a 16 lb. Belt Deflector Force at 7/16" deflection. After a few
hours of operation to allow the belts to seat into the sheave grooves recheck and adjust as needed to obtain an
8 to 12 lb. Belt Deflection Force at 7/16" deflection. Inspect belts and recheck belt tension periodically to
maintain an 8 to 12 lb. Belt Deflection Force at 7/16" deflection.
SAMURAI 12/08
Maintenance Section 4-15
©2008 Alamo Group Inc.
Advertisement
Table of Contents
