FLAIL HEAD INSPECTION
•
Inspect blades and blade bolts for looseness
and excessive wear. Rotate to 90° to make for
checking easier. Replace damaged, worn, and
missing blades as complete sets to maintain
cuttershaft balance.
•
Ensure rubber deflectors are in position and not
damaged. Replace worn, broken, and missing
sections immediately.
•
Ensure the rollers are in good condition and
rotate freely.
•
Inspect that all bolts and screws are in position
and are properly torqued.
•
Ensure hydraulic lines are properly connected
to the hydraulic motor. Check for hydraulic
leaks along hoses and fittings. DO NOT use
your hands to check for oil leaks. Use a piece
of heavy paper or cardboard to check for
hydraulic oil leaks.
•
Inspect the condition of the drive belts.
•
Ensure the drive belt shields are in place and in
good repair.
•
Remove any grass or other debris which may
be wrapped around the cuttershafts ends.
•
Inspect the condition of deck skid shoes and
hardware. OPS-B- 0026
Do not put hands or feet under mower decks. Blade Contact can result
in serious injury or even death.
stopped and the decks are securely blocked up.
SAMURAI 12/08
©2008 Alamo Group Inc.
OPERATION
Stay away until all motion has
Operation Section 3-16
(SFL-2)