Shutting Down The Implement; Disconnecting The Mower From The Tractor - Alamo RHINO FLEX FLAIL FX17 Operator's Manual

Table of Contents

OPERATION

10.6 Shutting Down the Implement

To shut down the implement, first bring the tractor

to a complete stop. Then slow down the implement

by reducing the engine speed before disengaging

the PTO.

Wait for all motion to stop before

proceeding to drive or shut down the tractor.

Park the tractor on a level surface, place the

transmission in park or neutral and apply the

parking brake, lower the attached implement to the

ground, shut down the engine, remove the key, and

wait for all motion to come to a complete stop

before exiting the tractor. OPS-F- 0026

Before disconnecting the mower, the PTO must be

disengaged and all motion at a complete stop.

Move the mower to a level storage location and

lower both wings to the ground. If the mower will

be stored with the sections in the raised position,

be sure that the locks are engaged. If the mower

is not resting securely on the ground, block the

mower

securely

before

attempting

disconnect it from the tractor. Use extreme care to

keep feet and hands from under the mower and

clear of any pinch points. OPS-F-0012_B

FX17/FX21 04/13

Operation Section 4-33

Table of Contents

Table of Contents

Rhino flex flail fx21