Setting Up E-Mail Alerts - HP 345646-001 - StorageWorks NAS 2000s External Storage Server Administration Manual

Basic Administrative Procedures and Setup Completion
Other applications may become orphaned in this manner when the Remote Desktop session is
exited improperly. A maximum of two Remote Desktop sessions may be used at any given
time. Improper exit from a session can result in the sessions becoming consumed. Sessions
and processes can be terminated using the Terminal Services Manager via
Start >Programs >Administrator Tools.
Note:

Setting up E-mail Alerts

E-mail messages are limited to the alerts generated from the WebUI status bar or the WebUI
status page, as well as some event log messages. Some alerts, such as the restart of the server,
only occur if the WebUI was utilized to initiate the request. For example, a restart initiated
using the WebUI will general an e-mail message indicating a restart has occurred. Initiating a
restart using the Windows 2000 schedule or Desktop will not. Messaging in the status bar and
page is limited to the following areas:
To activate this option:
1. From the WebUI, select Maintenance, Alert E-mail. The Set Alert E-Mail dialog box is
2. Select Enable Alert E-mail.
30
The Terminal Services Manager must be accessed via the iLO port or direct attached console.
WebUI Alerts
— NTBackup backup started
— NTBackup restore started
— Defrag started
— UPS power failure
— Restart pending
— Shutdown pending
— DFS not configured
— Date and time not configured
— No certificate
— Quota management alerts
Event Log Messages
— NTBackup Information
— UPS power failed
— UPS power restored
— UPS invalid config
— UPS system shutdown
— Quota management alerts
displayed.
NAS 2000s Administration Guide