HP 345646-001 - StorageWorks NAS 2000s External Storage Server Administration Manual page 91

3. On the Manage Shadow Copies page, select the volume on which to view shadow copy
4. On the Tasks list, click Properties.
Note:
this location after shadow copies have been enabled, all shadow copies must be deleted and cannot
be recovered. Remember enabling Shadow Copies creates a Shadow Copy by default.
5. Click OK to save changes, or click Cancel to discard changes.
Figure 45: Shadow Copies properties screen
NAS 2000s Administration Guide
properties.
The Shadow Copy Properties screen, as shown in
date and time the most recent shadow copy was made, and the maximum size setting.
Change the maximum size limit for all shadow copies, or choose No limit.
For volumes where shadow copies do not exist currently, it is possible to change the
location of the cache file. See "The Shadow Copy Cache File" earlier in this chapter. The
list of available disks and the space available on each is presented at the bottom of the
page. Managing the cache files on a separate disk is recommended.
If shadow copies have already been enabled, the cache file location is grayed out. To change
Caution: Use caution when reducing the size limit for all shadow copies. When the size is
set to less than the total size currently used for all shadow copies, enough shadow copies
are deleted to reduce the total size to the new limit. A shadow copy cannot be recovered
after it has been deleted.
Figure 45, lists the number of copies, the
Shadow Copies
91