Showing A Connection Icon On The Taskbar; Configuring The Tcp/Ip Protocol On The New Team - HP 345646-001 - StorageWorks NAS 2000s External Storage Server Administration Manual

Showing a Connection Icon on the Taskbar

To show a connection icon:
1. In the Network and Dial up Connections screen, double-click the NIC Team
2. At the bottom of the screen, select Show icon in task bar when connected, and then click

Configuring the TCP/IP Protocol on the New Team

After teaming the NICs, a new virtual network adapter for the team is automatically created.
However, by default the new adapter is set to DHCP. To manually configure the IP address,
perform the following steps.
To enter the TCP/IP address information for the team:
1. From the desktop, go to the Network and Dial up Connections screen and click
Figure 16: NIC Team Properties dialog box
2. Use the arrows and the scroll bar on the right of the screen to scroll through the
NAS 2000s Administration Guide
connection, and then click Properties.
Close.
Properties. Right-click the NIC Team icon and then select Properties. A screen similar
to the following is displayed.
Components list.
Basic Administrative Procedures and Setup Completion
39