Enabling Telnet Server; Sessions Information; Hp Insight Manager Version 7 - HP 345646-001 - StorageWorks NAS 2000s External Storage Server Administration Manual

Remote Access Methods and Monitoring

Enabling Telnet Server

Telnet Server can be enabled in two ways. The first is to use Remote Desktop to access a
command line interface and enter the following command:
The Telnet Server service needs to be enabled prior to running this command. The service can
be enabled by opening the services MMC:
1. Select Start, Run, then type services.msc.
2. Locate the Telnet service, right-click on it, then select Properties.
3. In the startup type drop-down box, choose Manual, and click OK.
The second is to open the WebUI:
1. Click Network.
2. Click Telnet.
3. Check the Enable Telnet access to this appliance box.
4. Click OK.

Sessions Information

The sessions screen provides the ability to view or terminate active sessions.

HP Insight Manager Version 7

The NAS 2000s is equipped with the latest Insight Management Agents for Servers, allowing
easy manageability of the server through HP System Management, HP OpenView, and Tivoli
NetView.
Insight Manager is a comprehensive management tool that monitors and controls the operation
of HP servers and clients. HP Insight Manager Version 7.0 or later is needed to successfully
manage the NAS 2000s using the following components:
Management agents monitor over 1,000 management parameters. Key subsystems make
health, configuration, and performance data available to the agent software. The agents act
upon that data by initiating alarms in the event of faults. The agents also provide updated
management information, such as network interface or storage subsystem performance
statistics.
192
net start tlntsvr
Windows-based console application available on the Insight Manager 7 CD-ROM loaded
on a separate client for NAS devices
Server or client based management data collection agents
NAS 2000s Administration Guide