Setting Up E-Mail Alerts - HP StorageWorks NAS 1500s Administrator's Manual

Basic Administrative Procedures and Setup Completion

Setting up E-mail alerts

E-mail messages are limited to the alerts generated from the WebUI status bar or the WebUI
status page, as well as some event log messages. Some alerts, such as the restart of the server,
only occur if the WebUI was utilized to initiate the request. For example, a restart initiated
using the WebUI will generate an e-mail message indicating a restart has occurred. Initiating a
restart using the Windows Storage Server 2003 schedule or Desktop will not. Messaging in the
status bar and page is limited to the following areas:
To activate this option:
1. From the WebUI, select Maintenance. Then select Alert E-mail. The Set Alert E-Mail
2. Select Enable Alert E-mail.
3. Indicate the types of messages to be sent.
4. Enter the desired e-mail address in the appropriate boxes.
5. After all settings have been entered, click OK.
26
WebUI Alerts
— NTBackup backup started
— NTBackup restore started
— Defrag started
— UPS power failure
— Restart pending
— Shutdown pending
— DFS not configured
— Date and time not configured
— No certificate
— Quota management alerts
Event Log Messages
— NTBackup Information
— UPS power failed
— UPS power restored
— UPS invalid config
— UPS system shutdown
— Quota management alerts
page is displayed.
Critical alerts
Warning alerts
Informational alerts
NAS 1500s and 500s Administration Guide