Setting User Quota Entries - HP 345646-001 - StorageWorks NAS 2000s External Storage Server Administration Manual

Disk Management
Note:
not exceeded their quota limit can store data on the volume. The first time a user writes data to a
quota-enabled volume, default values for disk space limit and warning level are automatically
assigned by the quota system.
To disable quota management on a volume:
1. On the primary navigation bar, click Disks.
2. Click Volumes.
3. Select the volume to manage.
4. In the Tasks list, click Set Default Quota.
5. On the Default Quota for (volume) page, clear the check box to Use quota limits to
6. Click OK.

Setting User Quota Entries

The Set User Quotas page allows the administrator to set, delete, or change disk quotas for any
user on the server. To set or change quota entries on the server:
1. On the primary navigation bar, click Disks.
2. Click Volumes.
3. Select the volume to manage.
4. From the Tasks list, click Set Quota Entries.
Figure 40: Setting user quotas
76
When enabling disk quotas on a volume, any users with write access to the volume who have
manage use of the volume.
NAS 2000s Administration Guide