Adding a New Client Group
To add a new client group:
1. From the NFS Client Groups dialog box, click New. The New NFS Client Group dialog
Figure 91: New NFS Client Group dialog box
2. Enter the name of the new group.
3. Enter the client name or their IP address.
4. Click Add. The system adds the client to the displayed list of members.
5. To remove a client from the group, select the client from the Members box and then click
6. After all clients have been added to the group, click OK. The NFS Client Groups dialog
Deleting a Client Group
To delete a group:
1. From the NFS Client Groups dialog box, select the group to delete and click Delete.
2. A verification screen is displayed. Confirm that this is the correct group and then click
NAS 2000s Administration Guide
box is displayed.
Remove.
box is displayed again.
OK.
The NFS Client Groups dialog box is displayed again.
Microsoft Services for NFS
163