Printing from DOS
applications
DOS applications in Windows
34
Printing from DOS
To change DOS print settings from the printer software:
1
Open the printer's
For help opening the Control Program, see
"Opening the Control Program" on page 6.
2
Follow the steps for your operating system:
Windows 3.1, 3.11, and Windows 95:
Click the
DOS Printing
Windows NT 4.0:
Click the
Device Settings
3
Change settings as needed.
4
Click
OK
to save the settings.
Note: When you make changes on the DOS Printing
Tab or Device Settings Tab, they apply to DOS
print jobs only. When you make changes on other
tabs, they apply to all print jobs.
This section describes how to print from:
•
DOS applications in Windows
•
native DOS (non-Windows) applications.
Use these instructions only if your application runs from
the DOS prompt in Windows. This section describes:
•
printing from a DOS application
•
printing from a DOS application to another printer
•
printing to a file
Control
Program.
Tab.
Tab.