Note On External Noise Calibration - Lexicon DC-1 - ADDENDUM Owner's Manual Addendum

Dolby digital ac-3 v2.00 and dts options digital controller

Hide thumbs Also See for DC-1 - ADDENDUM:

Table of Contents

Installation and

Calibration

Note on External Noise

Calibration

When using the external noise calibration, the DC-1 will load the factory

default effect for the format of the incoming signal. In other words, if a PCM

signal is coming into the DC-1 when external noise is engaged, the DC-1 will

load the PRO LOGIC effect with the factory preset settings. If a Dolby

Digital AC-3 signal is coming in, the DC-1 will load the DOLBY DIGITAL

effect with the factory preset settings. If a DTS signal is coming in (and the

DC-1 is the DTS Version), the DC-1 will load the DTS MUSIC effect with the

factory preset settings.

Lexicon

Table of Contents

Need help?

Do you have a question about the DC-1 - ADDENDUM and is the answer not in the manual?