Related Manuals for Oakton Temp-300
Summarization of Contents
Getting Started: Introduction, Safety, and Specifications
Product Introduction and Key Features
Overview of the hand-held instrument's capabilities and features.
Essential Safety Precautions
Critical safety guidelines for using the thermometer to prevent hazards.
Technical Specifications Overview
Details temperature ranges and resolution for various thermocouple types.
Installation, Accessories, and Connections
Battery Installation and Replacement
Step-by-step guide for replacing the instrument's batteries.
Optional Accessories for Use
Instructions for attaching rubber armour and assembling handsfree accessories.
Connecting Thermocouple Probes
Guidance on correctly connecting thermocouple probes to the instrument.
Instrument Operation and Display
Key Functions and Control Buttons
Explains the purpose and operation of the device's function keys (F1, F2, F3, etc.).
Display Overview and Modes
Details the LCD display elements and modes like HOLD, LOG, MIN/MAX/AVG.
Measurement Modes and Data Logging Initiation
Covers measurement modes (T1, T2, Delta) and how to initiate manual data logging.
Advanced Settings and Calibration
Setup Mode Navigation
How to access and navigate the setup menu for various parameters.
General Setup Configuration
Setting probe type, units, time, date, auto-off, and password.
Calibration Procedures
Explains how to perform offset, slope, and match calibrations using a password.
Alarms, Data Logging, and Reports
Alarm Settings Configuration
Configuring high and low limit alarms for individual probes.
Data Logging Setup Options
Setting the logging interval and location for data recording.
Calibration Report Data Display
Displaying the results of the last user calibration.
Maintenance and Troubleshooting
Clear/Reset Options
Options to clear Min/Max/Avg, calibration data, logged data, or reset all.
Maintenance, Cleaning, and Batteries
Guidance on instrument care, cleaning, and battery status checks.
Troubleshooting Common Faults
Lists common faults like "NO Display", "OPEN", "Err" and their solutions.
Warranty and Support Services
Warranty and Product Return
Information on product warranty, return procedures, and conditions.
Calibration and Repair Services
Details about InnoCal calibration and repair services, conformity, and value.
Technical Assistance and Contact Information
Contacting Oakton Instruments
Provides contact details for technical support, website, and email.
Need help?
Do you have a question about the Temp-300 and is the answer not in the manual?
Questions and answers