Using The Memory Channel List; About The Memory Channel List; Explanation Of The Function Keys On The Memory Channel List Screen - Yaesu FTDX9000 - DATA MANAGEMENT Operation Manual

U
This is the screen which displays the transceiver's memory channels. On the list, the channel number, ID tag,
frequency, and operating mode are shown. The FT
that may be arrayed into up to six groups, and you can check the entire memory system's status by viewing this
screen.
E
XPLANATION OF THE
[ 2/3.5 ]( LOAD )
Press this key to load memory data previously
saved on the CF card to the transceiver.
[ 3/5 ]( SAVE )
Press this key to save the current memory data
to the CF card.
[ 5/10 ]( MASK/RESTROKE )
It is possible to erase the currently-selected
memory channel's data by pressing this key. If
you want to restore the erased memory data,
press this key again after erasing the memory.
FT 9000MP/C
DX ONTEST
M
SING THE
A M
BOUT THE EMORY
F K
UNCTION EYS ON THE
D M
ATA ANAGEMENT
C
EMORY
C L
HANNEL
9000 has an extensive memory system of 99 channels
DX
M
EMORY
[ 6/14 ]( )
Use this key to move the highlighted field on the
memory list downward.
[ 7/18 ]( )
Use this key to move the highlighted field on the
memory list upward.
[ 8/21 ]( DISPLAY )
Press this key momentarily to move to the World
Clock page.
Press and hold this key in for two seconds to re-
vert to the Rotator Control page.
O M
PERATION
L
HANNEL
IST
C L S
HANNEL IST CREEN
Page 41
ANUAL
IST