Store; Store Mode - Simrad SH80 - REV C Operator's Manual

Parameters

Store

The Store button is located in the Store/Recall menu, which is
accessed from the Setup menu.
The Store button is used to store display information. This may be
a sequence loop or single display pictures, as selected in the Store
mode dialogue.
If a sequence loop storage is selected, the Store button is used for
start and stop of the storage. If single picture storage is selected, a
new picture storage is made each time the Store button is pressed.

Store Mode

The Store Mode button is located in the Store/Recall menu,
which is accessed from the Setup menu.
The Store Mode dialogue is used to select the storage function of
the Record button on the Sonar Operating Panel and the Store
button in the Store/Recall menu. The storage can be selected to
contain single shots, or different ping- or time sequences.
Related topics
→
Sonar Operating Panel; Record, page 35
135
850-164385 / Rev.C