Download Print this page

rough country PW05157 Manual

Ford 23-24 ford super duty manual bed step

Advertisement

Quick Links

Thank you for choosing Rough Country for your suspension needs.
Rough Country recommends a certified technician install this system. In addition to these instructions, professional
knowledge of disassembly/reassembly procedures as well as post installation checks must be known. Attempts to
install this system without this knowledge and expertise may jeopardize the integrity and/or operating safety of the
vehicle. Please read instructions before beginning installation. Check the kit hardware against the parts list on this
page and the product layout on the last page. Be sure you have all needed parts and know where they go. Also
please review tools needed list and make sure you have needed tools.
Rough Country makes no claims regarding lifting devices and excludes any and all implied claims. We will not be
responsible for any product that is altered.
If questions exist we will be happy to answer any questions concerning the design, function, and correct use of our
products.
Any vehicle equipped with any Rough Country product should have a "Warning to Driver" decal installed on
the inside of the windshield or on the vehicle's dash. The decal should act as a constant reminder for
whoever is operating the vehicle of its unique handling characteristics. Re-torque all installed hardware as
often as possible to ensure safe operation.
INSTALLING DEALER - it is your responsibility to install the warning decal and forward these installation
instructions on to the vehicle owner for review. These instructions should be kept in the vehicle for its service
FORD 23-24 Ford Super Duty Manual Bed Step
PRODUCT USE INFORMATION
NOTICE TO DEALER AND VEHICLE OWNER
PW05157
9

Advertisement

loading
Need help?

Need help?

Do you have a question about the PW05157 and is the answer not in the manual?

Questions and answers

Summary of Contents for rough country PW05157

  • Page 1 PRODUCT USE INFORMATION Rough Country makes no claims regarding lifting devices and excludes any and all implied claims. We will not be responsible for any product that is altered.
  • Page 2: Installation Instructions

    Manual Corner Step / 23-24 Ford Super Duty INSTALLATION INSTRUCTIONS PARTS LIST: Description Linkage arm assembly Step pad Mounting bracket Support bracket 8-1.25mm x 25mm Combo bolts 8mm Lock washer 8-1.25mm x 20mm Hex Bolt 8mm Nylon Lock Nuts 8mm x 24mm x 2mm Flat washers 8-1.25mm x 20mm T Bolt Linkage Arm Assembly Frame Mount...
  • Page 3: Tools Required

    Manual Corner Step / 23-24 Ford Super Duty TOOLS REQUIRED 13mm Socket Rachet Extensions Wrench Follow (Fig 1 – 3) to mount the frame and support bracket to the vehicle. Do not fully tighten hardware at this time. (Fig 1) Starting at the DS rear remove the (4) OEM flanged hex nuts Frame mount bracket will mount...
  • Page 4 Manual Corner Step / 23-24 Ford Super Duty (Fig 3) Install the frame mount bracket Follow (Fig 4 – 5) to install the frame & support bracket to the linkage arm assembly. (Fig 4) Attach frame mounting bracket to the linkage arm assembly (2) 8mm x 25mm combo Bolts (1) 8mm x 20mm Hex Bolt (1) 8mm Lock Washer...
  • Page 5 Manual Corner Step / 23-24 Ford Super Duty Follow (Fig 6-8) to install the step pad to the linkage arm assembly. Once finished, Tighten all hardware at this time to the preferred position. Do periodic inspections to the installation to make sure that all hardware is secure and tight.
  • Page 6 Manual Corner Step / 23-24 Ford Super Duty Complete Installation Note: Excess dirt & debris may prevent from functioning properly. Simply clean the dirt off with after periodically to maintain optimal condition of corner step. Page 5 of 5...

This manual is also suitable for:

Pw051579