Kuryakyn 1289 Installation Instructions

r e a r c a l I P e r c o v e r
f o r s u z u k I M 1 0 9
fI ts '06- uP s uzukI M1 o9 Mode ls
Parts Included
1 Rear Caliper Cover, Chrome
2 Alcohol Pads
1 Installation Instructions
Please read and understand entire instructions before starting installation.
thank you for choosIng küryakyn!
Procedure
steP 1 Use the alcohol pads to clean the top and front face of the rear caliper body. Be
sure to remove all dirt, grease, or any other debris for proper adhesion of the cover. See PIC.1.
steP 2 Remove the paper backing from the self-adhesive strips on the caliper cover.
Place the caliper cover over the caliper body. Be sure the through hole in the caliper cover is
centered, see PIC.2.
steP 3 Press the cover over the caliper body; the front face of the cover will need
additional pressure to ensure good adhesion to the raised lettering on the caliper body. Be
sure the through hole remains centered.
steP 4 Hold for one minute to ensure good
adhesion. Full bond strength will occur in 24 hours.
Ride On!
PIc.3
cover I nstalled
1289-11MC-0706
PIc.1
cle an any debr Is
fro M cal IPer body
PIc.2
center the
throug h hole
I N S TA L L AT I O N
1 2 8 9
CUSTOMER SERVICE
877.370.3604 (toll free)
INSTALLATION QUESTIONS
techsupport@kuryakyn.com
LIMITED WARRANTY
Küryakyn warrants that any Küryakyn products sold
hereunder, shall be free of defects in materials and
workmanship for a period of one (1) year from the
date of purchase by the consumer excepting the fol-
• Küryakyn shall have no obligation in the event
the customer is unable to provide a receipt showing
the date the customer purchased the product(s).
• The product must be properly installed,
maintained and operated under normal conditions.
• Küryakyn makes no warranty, expressed or
implied, with respect to any gold plated products.
• Küryakyn shall not be liable for any consequential
and incidental damages, including labor and
paint, resulting from failure of a Küryakyn product,
failure to deliver, delay in delivery, delivery in noncon-
forming condition, or for any breech of contract or
duty between Küryakyn and a customer.
• Küryakyn products are often intended for use
in specific applications. Küryakyn makes no
warranty if a Küryakyn product is used in
• Küryakyn electrical products are warranted for one
(1) year from the date of purchase by the consumer.
Components of Küryakyn products containing L.E.D.s
will be warranted for defects in materials and
workmanship for 3 years from the date of purchase.
• Küryakyn makes no warranty of any kind in regard
to other manufacturer's products distributed by
Küryakyn. Küryakyn will pass on all warranties made
by the manufacturer and where possible, will expedite
the claim on behalf of the customer,
but ultimately, responsibility for disposition of the
warranty claim lies with the manufacturer.
ABOUT OUR CATALOG
You'll find all our innovations for H-D, GL and
Metric Cruisers in our annual catalogs. Order online
today–select the "CATALOGS" icon. Each Küryakyn
product comes with a Proof-of-Purchase good for a
complimentary catalog. Details in packaging.
Be sure to ask your local dealer about other
Küryakyn products, the motorcycle parts and ac-
cessories designed for riders by riders.
©2005 Küryakyn USA All Rights reserved.
or call 715.247.2983
lowing provisions:
applications other than intended.