Download Print this page

Kuryakyn 1438 Installation Manual

Ellipse mirrors

Advertisement

Quick Links

ELLIPSE MIRRORS
PARTS INCLUDED
1
Left Ellipse Mirror Assembly—Convex Glass 1
Mirror Assembly—Convex Glass
2
5/16"-18 X 1-1/2" Socket Head Cap Screws
2
5/16"-18 X 2" Socket Head Cap Screws
1
2.5mm Hex Key Wrench
2
5/16" Split Lock Washers
2
5/16" Internal Tooth Lock Washers
2
Double End Threaded Studs
1
Installation Instructions
Please read and understand entire instructions before starting installation.
THANK YOU FOR CHOOSING K
IN ORDER TO PROTECT YOU AND OTHERS FROM POSSIBLE INJURY AND/OR
PROPERTY DAMAGE OR LOSS, PLEASE PAY CLOSE ATTENTION TO ALL
INSTRUCTIONS, WARNINGS, CAUTIONS AND NOTICES REGARDING THE USE
AND CARE OF THIS PRODUCT.
This indication alerts you to the fact that ignoring the
contents described herein may negatively affect product
performance and functionality.
the contents described herein can result in potential
IF INSTALLING THIS PRODUCT FOR ANOTHER PARTY,
PLEASE MAKE SURE THEY RECEIVE THIS COPY OF THE
INSTALLATION INSTRUCTIONS SO THEY ARE AWARE OF
THE IMPORTANT INFORMATION CONTAINED IN THEM.
TOOLS SUGGESTED
Set of Hex Wrenches, Set of Combination Wrenches
STRICTLY OBSERVE THE FOLLOWING GUIDELINES IN ORDER TO USE THE
PRODUCT PROPERLY AND AVOID POTENTIALLY DANGEROUS ACCIDENTS.
ALL INSTALLATIONS
STEP 1
Read and understand all steps in the instructions before starting the
installation. Park the motorcycle on a hard, level surface and turn off the
ignition.
NOTE:
The included 2.5mm Hex Wrench is used only in P/N 1428, 1430,
1437
& 1438 to adjust the swivel ball tension.
1
Hardware Kit, Including:
ϋ
RYAKYN!
This indication alerts you to the fact that ignoring
injury.
Right Ellipse
INSTALLATION
1438
NOTE:
Mirror adapters
(sold separately) are required for
installation on metric
cruisers.
the motorcycle. Protect painted
surfaces with a soft cloth or
blanket.
-cont.-
1438-26HD-0113
CUSTOMER SERVICE
INSTALLATION QUESTIONS
techsupport@kuryakyn.com or
LIMITED WARRANTY
Küryakyn warrants that any Küryakyn products sold
hereunder, shall be free of defects in
materials and workmanship for a period of one
(1) year from the date of purchase by the
consumer excepting the following provisions:
Küryakyn shall have no obligation in the event
the customer is unable to provide a receipt showing
the date the customer purchased the product(s).
●The product must be properly installed,
maintained and operated under normal
●Küryakyn makes no warranty, expressed or
implied, with respect to any gold plated products.
●Küryakyn shall not be liable for any consequential
and incidental damages, including labor and paint,
resulting from failure of a
Küryakyn product, failure to deliver, delay in
delivery, delivery in nonconforming condition, or for
any breech of contract or duty between
Küryakyn and a customer.
●Küryakyn products are often intended for use in
specific applications. Küryakyn makes no
warranty if a Küryakyn product is used in
applications other than intended.
●Küryakyn electrical products are warranted for one
(1) year from the date of purchase by the
consumer. L.E.D.'S contained in components of
Küryakyn products will be warranted for defects in
Avoid
damage to
877.370.3604 (toll free)
call 715.247.2983
conditions.

Advertisement

loading
Need help?

Need help?

Do you have a question about the 1438 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Kuryakyn 1438

  • Page 1 The included 2.5mm Hex Wrench is used only in P/N 1428, 1430, ●Küryakyn electrical products are warranted for one (1) year from the date of purchase by the 1437 & 1438 to adjust the swivel ball tension. consumer. L.E.D.’S contained in components of Küryakyn products will be warranted for defects in...
  • Page 2 materials and workmanship for 3 years from the date of purchase where as all other Harley-Davidson® or GL & Metric Cruisers. components shall be warranted for one(1) year. This includes, but is not limited to; control modules, wiring, chrome & other components. Be sure to ask your local dealer about other Küryakyn®...
  • Page 3 Ensure that the position of the mirror and stem DO NOT interfere with the operation of the motorcycle hand controls. FIG 1 MIRROR It is the installer’s responsibility to ensure that all of the fasteners (including pre-assembled) are tightened before operation of the motorcycle.
  • Page 4 STEP 10 Loosen and remove the retainer nut and ball stud clamp shown in FIG 2 STEP 11 Remove the stock mirror; hold the stock turn signal to prevent it from being damaged. PAGE -cont.-...
  • Page 5: Installation

    ELLIPSE MIRRORS INSTALLATION STEP 12 Screw a double ended stud into the new mirror stem; tighten and then tighten the set screw. FIG 2 PIC 1 NOTE: Ensure that the setscrew in the mirror stem does not prevent the double ended stud from being installed fully.
  • Page 6 STEP 23 Tighten all fasteners securely. It is the installer’s responsibility to ensure that all of the fasteners (including pre-assembled) are tightened before operation of the motorcycle. Küryakyn will not provide warranty coverage on products or components lost due to improper installation or lack of maintenance.