Kuryakyn 8027 Installation Manual

L A R G E I S O - B R A K E P E D A L P A D
F ITS: ST OCK R EPL ACEMENT FOR DRES SER, ROAD KING AND FLST M ODELS.
A L S O F ITS : '99- '05 ROAD S TAR ( EX. WARRIOR ), '96-'05 VU LCAN 1500, ' 98-' 05
IN TR U D ER 1500 LC /BOUL EVARD C90.
PART # INCLUDED
608027 1
2
1
908027 1
1
1
1
1
308027 1
THANK YOU FOR CHOOSING KURYAKYN!
NOTE
This installation should not be done unless the ambient temperature is above 50 degrees
Fahrenheit.
PROCEDURE
STEP 1 Remove the stock brake pedal pad from the brake lever.
STEP 2 The inside rubber pad is not adhered to the base from the factory — lift the pad out
of its "pocket".
STEP 3 Secure the chrome brake pedal pad to the lever with the provided flat socket cap
screw, flat washer, and acorn nut. Tighten securely.
STEP 4 Carefully clean the surface of the pad pocket with alcohol, acetone, etc.
STEP 5 Remove the adhesive backing from the rubber pad and affix the pad in place in the
pocket.
STEP 6 Apply pressure to the rubber pad for about 30 seconds to insure a good bond.
Ride On!
8027-12HD-0905
ISO Brake Pedal Pad Assembly Including:
Rubber Pads (installed)
Rubber Pad
Hardware Kit Including:
3/8"-16 x 3⁄4" FSCS
3/8" Acorn Nut
3/8" Flat Washer
Alcohol Pad
Installation Instructions
I N S TA L L AT I O N
8 0 2 7
CUSTOMER SERVICE
INSTALLATION QUESTIONS
techsupport@kuryakyn.com
LIMITED WARRANTY
Küryakyn warrants that any Küryakyn products sold
hereunder, shall be free of defects in materials and
workmanship for a period of one (1) year from the
date of purchase by the consumer excepting the
• Küryakyn shall have no obligation in the event
the customer is unable to provide a receipt showing
the date the customer purchased the product(s).
• The product must be properly installed,
maintained and operated under normal conditions.
• Küryakyn makes no warranty, expressed or
implied, with respect to any gold plated products.
• Küryakyn shall not be liable for any consequential
and incidental damages, including labor and
paint, resulting from failure of a Küryakyn product,
failure to deliver, delay in delivery, delivery in noncon-
forming condition, or for any breech of contract or
duty between Küryakyn and a customer.
• Küryakyn products are often intended for use
in specific applications. Küryakyn makes no
warranty if a Küryakyn product is used in
applications other than intended.
• Küryakyn electrical products are warranted for one
(1) year from the date of purchase by the consumer.
Components of Küryakyn products containing L.E.D.s
will be warranted for defects in materials and
workmanship for 3 years from the date of purchase.
• Küryakyn makes no warranty of any kind in regard
to other manufacturer's products distributed by
Küryakyn. Küryakyn will pass on all warranties made
by the manufacturer and where possible, will expe-
dite the claim on behalf of the customer,
but ultimately, responsibility for disposition of the
warranty claim lies with the manufacturer.
ABOUT OUR CATALOG
You'll find all our innovations for H-D, GL and
Metric Cruisers in our annual catalogs. Order online
today–select the "CATALOGS" icon. Each Küryakyn™
product comes with a Proof-of-Purchase good for a
complimentary catalog. Details in packaging.
Be sure to ask your local dealer about other
Küryakyn products, the motorcycle parts and ac-
cessories designed for riders by riders.
©2005 Küryakyn USA
877.370.3604 (toll free)
or call 715.247.2983
following provisions:
All Rights reserved.
™