This message...
THE PARTY IS FULL
TONER EMPTY
CHANGE x TONER
Toner Low x
Trans. Belt Life
Trans. Roll. Life
TRAYx OPEN
CLOSE TRAYx
USB Dev. Not support
USB Hub Not support
248
means...
The maximum num-
ber of 236 destina-
tions for the scan
data has been
reached.
The indicated toner
cartridge has
become empty.
(This message
appears if
TONER
EMPTY STOP
the MACHINE SET-
TING menu is set to
ON.)
The indicated toner
cartridge is low and
should be replaced
within 200 pages at
5% coverage of Let-
ter/A4 paper.
The time to replace
the transfer belt unit
has been reached.
The time to replace
the transfer roller
has been reached.
The indicated paper
tray is open.
A USB device
incompatible with
this machine is con-
nected.
A USB hub is con-
nected to this
machine.
Status, Error, and Service Messages
Do this...
Send the data, and
then try scanning
again. Otherwise,
delete unnecessary
destinations before
adding the desired
ones.
Replace the indicated
toner cartridge.
on
Prepare the indicated
toner cartridge.
Replace the transfer
belt unit.
Replace the transfer
roller.
Close the indicated
paper tray.
Disconnect the USB
device from this
machine.
This machine is not
compatible with a USB
hub. When connecting
USB cables to this
machine, do not use a
USB hub.