Westin 21-1400 Instructions

AUTOMOTIVE PRODUCTS, INC.
ITEM
1
2,3
4
5
6
7
1. Remove contents from box, verify all parts are present and free from damage. Carefully read and undwerstand all instructions before at-
tempting installation.
2. From underside of vehicle, remove the driver side body mounts bolts.
3. Determine driver/left and passenger /right Mounting Brackets. Hang driver/left front Mounting Bracket by partially threading back the
factory body mount bolt (Figure 1 & 2). Repeat this step for driver rear Mounting Bracket.
4. Position driver/left Sidebar onto Mounting Brackets. Attach Sidebar to Mounting Brackets by using the included (2) ½" x 2" Hex Head
Bolts, (2) ½" Lock Washers, and (2) ½" Flat Washers. Do not tighten at this time.
5. Level and adjust sidebar, and then tighten all hardware at this time
6. Torque all 1/2" hardware to 25-30 ft lbs
(On heavy duty models, it may be required to attach mounting brackets to opposing side of the vehicle to complete installation.)
SIDE STEPS
INSTRUCTIONS—INSTRUCCIONES—CONSIGNES
APPLICATION: 2007-2010 CHEVROLET SILVERADO / GMC SIERRA REGULAR CAB
QUANTITY
2 SIDE BARS
FRONT MOUNTING BRACKETS (2) DRIVERS
2
SIDE, (3) PASSENGER SIDE
2 REAR MOUNTING BRACKETS
4 1/2" X 2" HEX HEAD BOLTS
4 1/2" LOCK WASHERS
1/2" X 35MM FLAT WASHERS
4
PART NUMBER: 21-1400,21-1405, 23-1400, 23-1405
DESCRIPTION
1
TOOLS NEEDED
9/16" SOCKET AND RATCHET
9/16" WRENCH
TORQUE WRENCH
CAR ACCESSORIES