Kuryakyn 7333 Installation Instructions

DECO EAGLE FENDER ORNAMENT
PARTS INCLUDED
1 Deco Eagle Fender Ornament
1 Alcohol Pad
1 Installation Instructions
Please read and understand entire instructions before starting installation.
THANK YOU FOR CHOOSING K
IN ORDER TO PROTECT YOU AND OTHERS FROM POSSIBLE INJURY AND/OR
PROPERTY DAMAGE OR LOSS, PLEASE PAY CLOSE ATTENTION TO ALL
INSTRUCTIONS, WARNINGS, CAUTIONS AND ATTENTION NOTES REGARDING
THE USE AND CARE OF THIS PRODUCT.
ATTENTION!
This indication alerts you to the fact that ignoring the contents
described herein may negatively affect product performance and
functionality.
STRICTLY OBSERVE THE FOLLOWING GUIDELINES IN ORDER TO USE THE
PRODUCT PROPERLY AND AVOID POTENTIALLY DANGEROUS ACCIDENTS.
STEP 1
Read and understand all steps in the instructions before starting the
installation. Park the motorcycle on a hard, level surface and turn off the
ignition.
STEP 2
Remove any grease or debris from the installation area with soapy water and a
clean rag; rinse and allow the area to dry completely. PIC 1 Clean the area with
the included alcohol cleaning pad to remove any residue; allow the area to dry
completely.
ATTENTION!
Thoroughly clean the area of grease, oil, dirt, or other debris to ensure
proper adhesion. Küryakyn WILL NOT warranty any parts lost due to
improper installation.
ATTENTION!
The adhesive may not correctly bond if applied at temperatures less
than 50°F. Do not attempt this installation in temperatures less than
50°F.Rub the backing on the adhesive strip to activate the adhesive
before applying.
ATTENTION!
Fully compress the front fork and ensure there is no contact between
the fairing and the Deco Eagle.
STEP 3
Test fit the Deco Eagle to the front fender. Make sure that the Deco Eagle is
placed forward far enough on the fender so it does not hit the fairing, light bar
or bottom triple tree when the suspension is fully compressed. Make any
reference marks with a non-permanent marker or masking tape. Rub the
backing on the adhesive strip to activate the adhesive before applying. Remove
the adhesive backing. Press the Deco Eagle into place for 1 minute to ensure
proper adhesion. Full bond strength will occur within 24 hours. PIC 2
PIC 1
Ride On!
7333-21MC-0511
ϋ
RYAKYN!
CLEAN
THIS
AREA
PIC 2
INSTALLATION
7333
CUSTOMER SERVICE
INSTALLATION QUESTIONS
techsupport@kuryakyn.com
LIMITED WARRANTY
Küryakyn warrants that any Küryakyn products
sold hereunder, shall be free of defects in
materials and workmanship for a period of one
(1) year from the date of purchase by the
consumer excepting the following provisions:
● Küryakyn shall have no obligation in the event
the customer is unable to provide a receipt
showing the date the customer purchased the
●The product must be properly installed,
maintained and operated under
●Küryakyn makes no warranty, expressed or
implied, with respect to any gold plated
●Küryakyn shall not be liable for any
consequential and incidental damages, including
labor and paint, resulting from failure of a
Küryakyn product, failure to deliver, delay in
delivery, delivery in nonconforming condition, or
for any breech of contract or duty between
Küryakyn and a customer.
●Küryakyn products are often intended for use in
specific applications. Küryakyn makes no
warranty if a Küryakyn product is used in
applications other than intended.
●Küryakyn electrical products are warranted for
one (1) year from the date of purchase by the
consumer. L.E.D.'S contained in components of
Küryakyn products will be warranted for defects
in materials and workmanship for 3 years from
the date of purchase where as all other
components shall be warranted for one(1) year.
This includes, but is not limited to; control
modules, wiring, chrome & other components.
●Küryakyn makes no warranty of any kind in
regard to other manufacturer¹s products
distributed by Küryakyn. Küryakyn will pass on
all warranties made by the manufacturer and
where possible, will expedite the claim on behalf
of the customer, but ultimately, responsibility for
disposition of the warranty claim lies
ABOUT OUR CATALOG
For purchasing Küryakyn® products, you
can receive a complete catalog free of charge.
Send the Proof-of-Purchase below with
your address to: Küryakyn, P.O. Box 339,
Please indicate either Accessories Catalog for
Harley-Davidson® or GL & Metric Cruisers.
Be sure to ask your local dealer about other
Küryakyn® products, the motorcycle parts and
accessories designed for riders by riders.
©2005 Küryakyn USA® All Rights reserved.
877.370.3604 (toll free)
or call 715.247.2983
product(s).
normal conditions.
products.
with the manufacturer.
Somerset, WI 54025.