Auto Record Mode - DigiTech JAMMAN STEREO Owner's Manual

Auto Record Mode

The JamMan Stereo's Auto Record feature lets the JamMan automatically
®
begin recording when you begin playing or when audio is detected at the
JamMan Stereo's inputs. When enabled, Auto Record works globally on all
empty loop memories; you cannot use Auto Record with an existing loop.
When the footswitch is pressed, the JamMan Stereo is
Rec/PLaY/oVeRDUb
armed for recording but won't start recording until you start playing (the
status and footswitch LEDs flash red to show that
RecoRD Rec/PLaY/oVeRDUb
the JamMan is armed). The JamMan monitors the input level and starts the
recording when it detects an audio signal.
If you've tapped in a tempo while Auto Record is enabled, the rhythm guide
track will begin playing. Pressing the footswitch will arm
Rec/PLaY/oVeRDUb
the JamMan Stereo for recording. As soon as signal is detected, recording
will begin immediately.
Changing to an empty loop memory while is enabled will preserve
aUto Rec
the state (the button will turn off when a memory that
aUto Rec aUto Rec
has a loop already stored in it is selected).
To turn off Auto Record press the button until it turns off.
, aUto Rec
26