Storing/Copying Phrases; Store Changes To A Loop; Copy A Loop To A Different Memory Location - DigiTech JAMMAN STEREO Owner's Manual

Storing/Copying Phrases

Anytime a change is made to a loop memory location (Rhythm Type, Tempo,
Time Signature, Record, Overdubs etc.) the
light. This indicates that the changes will be lost unless a store procedure
is performed before selecting a new loop memory location, turning off the
power.

Store Changes to a Loop

1. Stop any recording activity using the
2. Press the
to flash (the
3. (Optional) Turn the
location to store the loop with its changes (the
are off), or press
4. Press the
stoRe

Copy a Loop to a Different Memory Location

1. Stop any playback or record activity using the
2. Turn the
loop (either the
3. Press the
to flash.
4. Turn the
(the
LooP
5. Press the
memory location.
Note: The Clear and Overdub Undo/Redo functions cannot be performed
to the loop after a Store/Copy procedure.
38
button. The
stoRe
shows the current loop memory location).
DIsPLaY
seLect
to abort.
eXIt
button again. The changes are now saved and the
stoRe
button turns off.
knob to select a memory location that contains a
seLect
or
LooP
button. The
stoRe
knob until an empty memory location is selected
seLect
and LEDs are off), or press
sINgLe
button again. The loop is now copied to the new
stoRe
stoRe
teMPo/stoP
button and the
stoRe
knob to select an empty loop memory
LED is lit).
sINgLe
and the
DIsPLaY
button will immediately
footswitch.
DIsPLaY
or
LooP sINgLe
footswitch.
teMPo/stoP
button will begin
stoRe
to abort.
eXIt
will begin
LEDs