Formatting Sd Cards; Unformatted Cards - DigiTech JAMMAN STEREO Owner's Manual

Using Optional SD/SDHC Memory Cards

Formatting SD Cards

A memory card that is inserted into the
should be formatted using the JamMan Stereo's format procedure. To format
an SD/SDHC Card in the JamMan Stereo, follow these steps:
1. Enable the
for four seconds. The
will begin flashing.
2. Press the
and the
DeLete
press the
3. To initiate the card formatting procedure, press and hold the
button again for two seconds. The
the card is being formatted.

Unformatted Cards

If a memory card is inserted into the JamMan Stereo that does not have a
valid format, the JamMan Stereo will not recognize it and the
read nF. The card must be formatted before the JamMan Stereo can use it.
To format the card, follow these steps:
1. While the
prompting for a format confirmation.
2. Press the flashing
button will continue to flash. You can press the
stoRe
abort the procedure.
3. To initiate the card formatting procedure, press and hold the
button for two seconds. The
card is being formatted. Once completed, the
the card is now ready for recording.
button and then press and hold the
sHIft
DIsPLaY
button again. The
DeLete
button will continue to flash. To abort this procedure,
button at any time.
eXIt
reads nF, the
DIsPLaY
button. The
stoRe
Stereo for the first time
JamMan
®
will show FO (Format) and this button
will read F? (Format ?)
DIsPLaY
will show Bu indicating
DIsPLaY
button will begin flashing
stoRe
will read F? and the
DIsPLaY
will show Bu indicating the
DIsPLaY
button
DeLete
DeLete
will
DIsPLaY
button to
eXIt
stoRe
will read 1 and
DIsPLaY
55