Mounting; Desk Mounting; Bottom Panel - Honeywell 9900LUP-6211G0 - Hand Held Products Dolphin 9900 User Manual
User guide
Hide thumbs
Also See for 9900LUP-6211G0 - Hand Held Products Dolphin 9900:
- Quick start manual (15 pages)
Table of Contents
Advertisement
Mounting
Set the base on a dry, stable surface, such as a desktop or workbench near an electrical outlet. Be sure
to provide enough workspace with good lighting for the user to view and operate the Dolphin terminal
while it is in the base.
When choosing a location, bear in mind that:
• the mounting location must allow users easy access to the Auxiliary Battery Well, and
• the serial and USB ports as well as the power jack face straight out of the rear panel, and you will most
likely want easy access to them in the future.
Installation Hardware
Screw:
3/16 in. dia x 5/8 in. long pan head screw
Washer:
1/2 in. OD x 7/32 in. ID x 3/64 in. thick
Nut:
3/16 in. dia
Desk Mounting
The DIN rail slot (7.5 X 35 mm) on the bottom to allow for secure desk attachment of the unit if desired.
Auxiliary Battery Well
DIN Rail (7.5 X 35 mm)
Slide the DIN rail slot along the bottom panel.
Then, using the appropriate nuts and bolts, secure the DIN rail to the desk or flat surface.
11 - 10
Serial and USB port location (not in view)
Advertisement
Table of Contents
