Chapter 1 - Agency Information; Label Locations - Honeywell 9900LUP-6211G0 - Hand Held Products Dolphin 9900 User Manual

1
Agency Information
Dolphin 9900, 9950, and 9951 terminals meet or exceed the requirements of all applicable standards
organizations for safe operation. However, as with any electrical equipment, the best way to ensure safe
operation is to operate them according to the agency guidelines that follow. Please read these guidelines
carefully before using your Dolphin terminal.

Label Locations

Dolphin 9900
Compliance Label
Laser Safety Label
If the following label is attached to your product, it indicates the product contains a laser engine or laser
aimer:
SE1200 Laser Scan Engines
LASER LIGHT. DO NOT STARE INTO BE AM.
CLAS S 2 LASER PRODUCT. 1.0 mW MAX
OUTPUT: 650nM. IEC60825-1:1993+A1+A2
Complies with 21 CFR 1040.10 and 1040.11
except for deviations pursuant to Laser
Notice No. 50, dated J une 24, 2007.
= 35+/- 5 Scans/Sec.
S can R ate
Laser Eye Safety Statement: This device has been tested in accordance with and complies with
IEC60825-1: 1993+A1+A2 and 21 CFR 1040.10 and 1040.11, except for deviations pursuant to Laser
Notice No. 50, dated July 26, 2001. LASER LIGHT, DO NOT STARE INTO BEAM, CLASS 2 LASER
PRODUCT, 1.0 mW MAX OUTPUT: 650nM.
Caution - use of controls or adjustments or performance of procedures other than those specified herein
may result in hazardous radiation exposure.
Dolphin 9950 & 9951
Compliance Label
Image Engines with Integrated Laser Aimers
LASER LIGHT. DO NOT STARE INTO BEAM.
CLASS 2 LASER PRODUCT
1.0 mW MAX OUTPUT: 650nM
IEC60825-1: 1993+A1+A2
Complies with 21 CFR 1040.10 and 1040.11
except for deviations pursuant to Laser
Notice No. 50, dated June 24, 2007.
1 - 1