curt 13440 Manual

13440
8/20/2009
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH:
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT DISTRIBUTION HITCH:
***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.***
HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT
Parts List
ITEM QTY PART NUMBER
1 4 HFN 1213 HEX FLANGE NUT
2 4 1/2-13 x 3 1/2" HEX BOLT
3 4 CM-SP1 .250 x 1.50 x 2.00" SQUARE HOLE SPACER
4 6 M12 x 1.25 x 45 HEX BOLT
5 6 1/2" CONICAL TOOTHED WASHER
HITCH WEIGHT: 36 LBS.
INSTALL TIME
PROFESSIONAL: 40 MINUTES
80
NOVICE (DIY): MINUTES
INSTALL NOTES:
-NO DRILL
INSTALLATION STEPS
1) LOWER SPARE TIRE.
2) RAISE HITCH INTO POSITION, MAKING SURE TO SLIDE BUMPER MOUNT UNDER FASCIA, AND
ATTACH SIDE PLATE FASTENERS.
3) INSTALL FASTENERS TO BUMPER MOUNT WITH THE SPACERS ON TOP OF BUMPER MOUNT
AND TIGHTEN ALL FASTENERS.
4) RAISE SPARE TIRE INTO POSITION.
5) TIGHTEN ALL M12 FASTENERS TO 68 LB-FT.
TIGHTEN ALL 1/2 FASTENERS TO 75 LB-FT.
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS
ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.
Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
Curt Manufacturing Inc., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of
this product voids the warranty. Curt Manufacturing Inc.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
consequential loss or damage.
75176 / 757393
01-07 TOYOTA SEQUOIA
DESCRIPTION
5
4
5000 LBS. TRAILER WEIGHT &
LBS. TRAILER WEIGHT &
6500
1-800-798-0813
2
3
1
500 LBS. TONGUE WEIGHT.
LBS. TONGUE WEIGHT
650