GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH:
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT DISTRIBUTION HITCH:
***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.***
HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT
Parts List
ITEM
QTY
PART NUMBER
1
4
1/2-13 x 1 3/4
CARRIAGE BOLT
2
2
CM-SP40
.188 x 1.00 x 3.00" SQUARE HOLE SPACER
3
2
CM-SP4
.250 x 1.50 x 3.00" SQUARE HOLE SPACER
4
4
HFN 1213
HEX FLANGE NUT
5
2
1_2 x 30 FISHWIRE
1/2" x 30" FISHWIRE
6
2
1_2 FISHWIRE
1/2" FISHWIRE
DRIVER SIDE
FRAME RAIL
HITCH WEIGHT:
35
LBS.
INSTALL TIME:
30
MINUTES
INSTALL NOTES:
- NO DRILLING REQUIRED
- FISHWIRE HARDWARE
- LOWER SPARE TIRE
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS
ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.
Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
Curt Manufacturing Inc., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of
this product voids the warranty. Curt Manufacturing Inc.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
Custom wiring harness (4-way flat output) for toyota hilux (mexican vehicle);
toyota t-100; toyota tacoma (2 pages)
Summary of Contents for curt 13456
Page 1
ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND. Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective, Curt Manufacturing Inc., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase.
Page 2
ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND. Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective, Curt Manufacturing Inc., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase.
Need help?
Do you have a question about the 13456 and is the answer not in the manual?
Questions and answers