curt 13445 Manual

13445
9/18/2009
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH:
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT DISTRIBUTION HITCH:
***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.***
HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT
Parts List
ITEM QTY PART NUMBER
1 4
1/2"
2 4 M12 - 1.25 x 40 HEX
3 4 3/8"
4 4 M8-1.25 x 35
FRAME RAIL
3
4
HITCH WEIGHT: 23 LBS.
INSTALL TIME
25
PROFESSIONAL: MINUTES
NOVICE (DIY): 50 MINUTES
INSTALL NOTES:
-REMOVE TOW HOOKS
-NO DRILLING REQUIRED
-LOWER EXHAUST
-RELOCATION OF FACTORY 7 WAY
PLUG MAY BE REQUIRED
INSTALLATION STEPS
1. Remove tow hooks if present.
2. Maneuver passenger side plate over the exhaust and hold hitch up against frame.
3. Line up holes in the hitch side plates to existing weldnuts in frame. Install M12 and M8 bolts as shown.
4. Torque all M12 fasteners to 65 ft.-lbs. Torque all M8 fasteners to 17 ft.-lbs.
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS
ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.
Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
Curt Manufacturing Inc., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of
this product voids the warranty. Curt Manufacturing Inc.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
consequential loss or damage.
78445 / 757394 / RRH13445
LEXUS GX470 & TOYOTA 4-RUNNER
DESCRIPTION
CONICAL TOOTHED WASHER
HEX TAP BOLT
CONICAL TOOTHED WASHER
HEX TAP BOLT
EXISTING WELD NUTS
1
2
5,000 LBS. TRAILER WEIGHT &
5,500 LBS. TRAILER WEIGHT &
1-800-798-0813
500 LBS. TONGUE WEIGHT.
LBS. TONGUE WEIGHT
550