Dash Disassembly 95-8902 Subaru Forester 2009-2013/Forester 2009-2013/ (with DVD based NAV) Impreza WRX 2013-up/Impreza WRX STI 2008-2012/ Subaru Impreza 2008-2011 1. Unclip and remove the trim panel surrounding the factory radio including the A/C vents. (Figure A) 2. Remove (4) Phillips screws securing the radio.
Kit Assembly 95-8902 Double DIN radio provision 1. Snap the double DIN brackets to the inside edge of the radio housing. (Figure A) 2. Slide the double DIN radio into the bracket/radio housing assembly and secure the radio to the assembly using the screws supplied with the radio.
Page 5
INSTALLATION INSTRUCTIONS FOR PART 95-8902 NOWLEDGE IS OWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.
Need help?
Do you have a question about the 95-8902 and is the answer not in the manual?
Questions and answers