curt 12058 Manual

12058 00-05 CADILLAC DEVILLE AND 06-PRESENT DTS
9/3/2009
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH:
***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.***
WARNING: ALL NON-TRAILER LOADS APPLIED TO THIS PRODUCT MUST BE SUPPORTED BY AUXILIARY STABILIZING STRAPS.
** FAILURE TO PROPERLY SUPPORT NON-TRAILER LOADS WILL VOID PRODUCT WARRANTY**
HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT
Parts List
ITEM QTY PART NUMBER
1 1 1/2" FISHWIRE TOOL
2 4 CM-SP6 .250 x 1.00 x 3.00" SQUARE HOLE SPACER
3 4 HFN 1213 HEX FLANGE NUT
4 2 M8-1.25 x 35 HEX BOLT
5 2 3/8" CONICAL TOOTHED WASHER
6 4 1/2-13 x 1 3/4 CARRIAGE BOLT
ACCESS HOLE
2
6
EXISTING WELDNUT
HITCH WEIGHT: 27 LBS.
INSTALL TIME
20
PROFESSIONAL: MINUTES
40
NOVICE (DIY): MINUTES
INSTALL NOTES:
-NO DRILLING REQUIRED
INSTALLATION STEPS
1. Raise hitch into position.
2. Install two M8 bolts into existing weldnuts as shown.
3. Fishwire remaining fasteners as shown. Note: 1/2" bolt and block must be inserted
separately into access hole during fishwiring process.
4. Torque M8 fasteners to 25 lb.-ft. Torque all 1/2" fasteners to 75 lb.-ft.
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS
ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.
Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
Curt Manufacturing Inc., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of
this product voids the warranty. Curt Manufacturing Inc.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
consequential loss or damage.
36287
DESCRIPTION
4
5
3
3500 LBS. TRAILER WEIGHT &
1-800-798-0813
1
DESIGNED FOR USE WITH
BALL MOUNT # D-21 / 45521
350 LBS. TONGUE WEIGHT.