Advertisement
Quick Links
YEARS: 2009-CURRENT
MAKE:
WARNING: NEVER EXCEED YOUR VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY
For more information log onto www.curtmfg.com & for helpful towing tips log onto www.hitchinfo.com
WEIGHT CARRYING:
PRO INSTALL TIME:
NOVICE INSTALL TIME:
IF YOU ARE HESITANT TO UNDERTAKE
THIS TASK ON YOUR OWN, CONTACT AN AUTHORIZED
CURT INSTALLER FOR ADDITIONAL ASSISTANCE.
INSTALLATION REQUIRES:
TORQUE
WRENCH
RATCHET
12mm
14mm
SWIVEL
17mm
SOCKET
SOCKET
EXTENSION
SAFETY
GLASSES
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE ALL FASTENERS ARE TIGHT AND ALL STRUCTURAL COMPONENTS ARE SOUND
CURT Manufacturing LLC. warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
CURT Manufacturing LLC. may repair or replace the product at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of this product
SCAN FOR
voids the warranty. CURT Manufacturing LLC.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or consequential loss or damage.
MORE INFO
For more information log onto www.curtmfg.com
This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C.Regulation V-5 and SAE J684.
12341
INSTALLATION INSTRUCTIONS
TOYOTA
TRAILER WEIGHT:
3,500
LBS.
TONGUE WEIGHT:
350
LBS.
30
MIN.
MIN.
INSTALLATION TIPS:
60
MIN.
1. BEFORE YOU BEGIN INSTALLATION, READ ALL
INSTRUCTIONS THOROUGHLY.
2. TO EASE INSTALLATION, 2 PEOPLE MAY BE
REQUIRED.
3. USING PROPER TOOLS WILL GREATLY IMPROVE
THE QUALITY OF THE INSTALL AND REDUCE THE
TIME REQUIRED.
4. NEED HELP OR HAVE SOME QUESTIONS?
CALL TECHNICAL SUPPORT AT 877.287.8634
12"
LEVEL OF DIFFICULTY:
SOCKET
EASY
EXTENSION
14mm
DEEP
WELL
SOCKET
MODEL: VENZA
WARNING:
ALL NON-TRAILER (WHEEL-LESS) LOADS APPLIED TO THIS PRODUCT MUST BE SUPPORTED
BY 18050 STABILIZING STRAPS. PLEASE SEE THE CURT CATALOG OR VISIT US ONLINE AT
WWW.CURTMFG.COM FOR FURTHER INFORMATION.
EASY
MODERATE
CHALLENGING
NO DRILL
WELDNUT CLEARING
Safety glasses should be
worn at all times while
installing this product .
STYLE:
VEHICLE PHOTO:
REPRESENTATIVE PHOTO
HITCH ILLUSTRATION:
MAKE SURE YOUR HITCH MATCHES
CROSSOVER
8/20/2020
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for curt 12341
Summary of Contents for curt 12341
- Page 1 PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE ALL FASTENERS ARE TIGHT AND ALL STRUCTURAL COMPONENTS ARE SOUND CURT Manufacturing LLC. warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective, CURT Manufacturing LLC.
- Page 2 INSTALLATION WALKTHROUGH: 1) If the vehicle is all wheel drive, remove the (2) Parts List ITEM PART NUMBER DESCRIPTION sway bar brackets. Save the existing nuts for 30-00163 WASHER, S-CON,7/16,YZ use in step 4. 10-10298 HHCS,M10x1.25,35,CL10.9,YZ CM-SP50 .250 x 1.00 x 1.50" ROUND HOLE SPACER SWAY BAR MOUNT SPACER BLOCK EXISTING SWAY BAR BRACKET...
- Page 3 INSTALLATION WALKTHROUGH: 5) Torque all M10 hardware to 45 ft-lbs. 3) Lower the exhaust by removing the (4) hex flange bolts securing the isolator hanger brackets to the frame. Save the bolts for use in step 6. 4) Raise the hitch into position and install (3) 10mm bolts 6) Raise exhaust into postion and secure isolator mounts and conical toothed washers per side into the existing using the bolts removed in step 3...
- Page 4 ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND. Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective, Curt Manufacturing Inc., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase.
Need help?
Do you have a question about the 12341 and is the answer not in the manual?
Questions and answers