curt 12490 Manual

12490
4/28/2011
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH:
***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.***
WARNING: ALL NON-TRAILER LOADS APPLIED TO THIS PRODUCT MUST BE SUPPORTED BY AUXILIARY STABILIZING STRAPS.
** FAILURE TO PROPERLY SUPPORT NON-TRAILER LOADS WILL VOID PRODUCT WARRANTY**
HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT
Parts List
ITEM QTY PART NUMBER
1 6 M12-1.25 x 30mm HEX BOLT
2 6 1/2" CONICAL TOOTHED WASHER
TOOLS REQUIRED
RATCHET
TORQUE WRENCH
19mm SOCKET
17mm SOCKET
DRIVER SIDE
FRAME RAIL
2
1
HITCH WEIGHT: 28 LBS.
INSTALL TIME
PROFESSIONAL: 20 MINUTES
NOVICE (DIY): 45 MINUTES
INSTALL NOTES:
- REMOVE TOW HOOK
- NO DRILLING REQUIRED
INSTALLATION STEPS
1) Remove OEM tow hook from vehicle (if present) and return to owner.
2) Raise hitch back into position on vehicle and install hex bolts and conical tooth washers.
3) Torque all 12mm fasteners to 65 lb-ft.
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS
ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.
Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
Curt Manufacturing Inc., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of
this product voids the warranty. Curt Manufacturing Inc.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
consequential loss or damage.
36331
SCION XB
DESCRIPTION
3,500 LBS. TRAILER WEIGHT &
1-800-798-0813
PASSENGER SIDE
FRAME RAIL
DESIGNED FOR USE WITH
BALLMOUNT #55001 / 45501
350 LBS. TONGUE WEIGHT.