KOBE RAX94 SQB-1 Parts Location And Replacement

Download this manual

RAX94 SQB-1 Parts Location and Replacement

This basic guide is to show the parts location of the RAX94 SQB-1 and how to remove or install certain parts.

To see more detailed guidelines, please visit:

For 30" wall mount models: RAX9430SQB-1, RAX9430SQB-DC30-1, RAX9430SQB-DC46-1

For 36" wall mount models: RAX9436SQB-1, RAX9436SQB-DC30-1, RAX9436SQB-DC46-1

1. Blower System

2. Control Switch

3. LED Light (3W)

KOBE Range Hoods

"So Quiet...You Won't Believe It's On!"

Overall Snapshot of RAX94 SQB-1

Part #7 – See "Parts List" page on manual)

(Manual

Part #5 – See "Parts List" page on manual)

(Manual

Part #4 – See "Parts List" page on manual)

(Manual

Page 1 of 5

Version 20160725

Kobe Service and Repair

Need help?

Do you have a question about the RAX94 SQB-1 and is the answer not in the manual?

Page 1 “So Quiet…You Won’t Believe It’s On!” RAX94 SQB-1 Parts Location and Replacement This basic guide is to show the parts location of the RAX94 SQB-1 and how to remove or install certain parts. To see more detailed guidelines, please visit: Kobe Service and Repair For 30”...
Page 2 KOBE Range Hoods “So Quiet…You Won’t Believe It’s On!” Removing the Capacitor Support Warning: 1. Loosen the screw first with a hand tool screw driver. 2. When pulling the wires from the capacitor support, press the ‘push release’ at the back of the cord.
Page 3 KOBE Range Hoods “So Quiet…You Won’t Believe It’s On!” Accessing the Capacitor and LED Driver Part #9 – See “Parts List” page on manual) 5. Capacitor (Manual Part #4 – See “Parts List” page on manual) 6. LED Driver (Manual...
Page 4 KOBE Range Hoods “So Quiet…You Won’t Believe It’s On!” Removing the Control Switch Figure 1 Figure 2 Figure 3 Figure 4 Warning: For the Accessing the LED Light process above, loosen the screw first with a hand tool screw driver.
Page 5 KOBE Range Hoods “So Quiet…You Won’t Believe It’s On!” Removing the Blower System Warning: 1. Loosen the screw first with a hand tool screw driver. 2. Place a support or hold the blower before removing it. Figure 1 Figure 2...