Aritech 1X-E4 Series Quick Operation Manual

1X-E4 Series Quick Operation Guide
If you hear the buzzer
Determine the cause of the buzzer
If the buzzer is sounding and the Fire Alarm LEDs are
flashing or steady, then it's a fire alarm.
WARNING: Depending on your fire alarm system
configuration, the buzzer may be your first indication of a
fire alarm.
If the buzzer is sounding and the Fault LED is flashing,
then it's a fault.
P/N 501-415403-5-20b • ISS 27JAN23
FIRE ALARM
FAULT
For a fire alarm
1. Determine the location of the fire
Check the location of the fire, indicated by the Zone
LEDs.
If Fire Alarm and Zone LEDs are flashing, the fire alarm
has been activated by a detector. If they are steady, the
fire alarm has been activated by a manual call point.
2. Verify the fire alarm
If necessary, investigate the location of the fire alarm to
confirm that the alarm is genuine.
Depending on the configuration of your fire and
evacuation alarm system, you may have up to ten
minutes to investigate the alarm before fire brigade
notification devices are activated.
3. Leave the building
Once the fire alarm has been confirmed, leave the
building and follow your company's evacuation drill.
1