Bowflex SelectTech Stand Manual
![]()
Specifications
Stand Weight: approx. 29.3 lb/13.29 kg
![]()
![]()
- Read and understand the complete user guide. Keep manual for future reference.
- Read and understand all warnings on this device. If at any time the warning stickers become loose, unreadable or dislodged, contact Nautilus Customer Service for replacement stickers.
- Children must not be allowed on or near to this device.
- This device is for home use only.
- Set up and operate this device on a solid, level, horizontal surface.
- Make sure that you give users enough free space around the device for safe operation. (See product specifications for free space dimensions).
- Keep third parties out of this area when the device is in use.
- Do not stand, sit or climb on this device.
- Consult a physician prior to using any exercise equipment.
Maintenance
The safety and performance of this product can be maintained only if it is examined regularly for damage and wear.
Examine the equipment before each use for damage and wear. Replace broken components immediately or put the equipment out of use until repaired.
Daily/Before Each Use: Examine equipment. Make sure it looks in good condition and operates smoothly. If you find damage, DO NOT USE. Contact Customer Service for servicing.
Daily/After Each Use: Clean equipment with a clean, dry cloth. Do not use cleansers containing enzymes.
Weekly: Clean equipment fully with a clean cloth and ammonia-based cleaner. Touch up any scratches with touch-up paint to prevent rust, if necessary.
Monthly: Examine the frame for signs of cracking or permanent bending. Do not use the equipment if you see these signs. Contact Customer Service immediately.
If you have any questions on the correct use or maintenance of this equipment, contact Customer Service at 1 (800) 605-3369. Only Nautilus-trained or Nautilus-authorized personnel should make extensions, readjustments, modifications, or repairs.
Assembly
![]()
Tools (included)
![]()
Item | Qty | Description |
1 | 1 | Bottom Cross Brace |
2 | 1 | Stand Leg, Left |
3 | 1 | Stand Leg, Right |
4 | 2 | Rear Stabilizer |
5 | 2 | Dumbbell Platform |
6 | 1 | Media Tray |
7 | 2 | Retaining Strap |
8 | 4 | Leveler |
Large Hardware Card |
Item | Qty | Description |
A | 4 | Bumpers (for 552 or 1090 dumbbell) |
B | 8 | Pan Phillips Screw, M3.5x9.5 |
C | 8 | Button Head Cap Screw, M10x1.5x70 |
D | 8 | Securing Nut, M10 |
E | 16 | Flat Washer, M10 |
F | 4 | Flat Washer, M5 |
G | 4 | Flat Head Cap Screw, M5x0.8x12 |
H | 4 | Securing Nut, M5 |
Small Hardware Card (for 560 Dumbbells only) |
J | 8 | Bumpers (for 560 dumbbell) |
K | 8 | Pan Phillips Screw, M6x16 |
Note: Selected pieces of Hardware have been provided as spares on the Hardware Card. Be aware that there may be remaining Hardware after the proper assembly of the equipment.
For the 552 or 1090 Dumbbells
- Attach the Appropriate Bumpers for Your 552 or 1090 Dumbbells
![Bowflex - SelectTech Stand - Assembly - 552 or 1090 Dumbbells - Step 1 Assembly - 552 or 1090 Dumbbells - Step 1]()
- Assemble the Stand
![Bowflex - SelectTech Stand - Assembly - 552 or 1090 Dumbbells - Step 2 Assembly - 552 or 1090 Dumbbells - Step 2]()
- Attach the Retaining Straps to the Stand and Fully Secure each Dumbbell Base
![Bowflex - SelectTech Stand - Assembly - 552 or 1090 Dumbbells - Step 3 Assembly - 552 or 1090 Dumbbells - Step 3]()
- Final Inspection
Inspect your equipment to ensure that all fasteners are tight and components are properly assembled.
Do not use or put the equipment into service until the equipment has been fully assembled and inspected for correct performance in accordance with the User's Guide. Fully tighten the hardware before you put the dumbbells into the installed dumbbell platforms or bases on the stand.
For the 560 Dumbbell
- Assemble the Stand
![Bowflex - SelectTech Stand - Assembly - 560 Dumbbell - Step 1 Assembly - 560 Dumbbell - Step 1]()
- Remove and Discard the Rubber Stabilizers, and then Attach the Dumbbell Bases
Remove the dumbbell from its base before you attach the Dumbbell Base to the stand to make sure that the dumbbell does not fall during installation.
Fully tighten the hardware before you put the dumbbells into the installed Dumbbell Bases on the stand.
Note: The Rubber Stabilizers and hardware must be removed from the Dumbbell Bases and discarded. The 560 Dumbbell Base is not included with the Stand.
![Bowflex - SelectTech Stand - Assembly - 560 Dumbbell - Step 2 Assembly - 560 Dumbbell - Step 2]()
- Final Inspection
Inspect your equipment to ensure that all fasteners are tight and components are properly assembled.
Do not use or put the equipment into service until the equipment has been fully assembled and inspected for correct performance in accordance with the User's Guide. Fully tighten the hardware before you put the dumbbells into the installed dumbbell platforms or bases on the stand.
Important Safety Instructions
Before using this equipment, obey the following warnings:
This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and understand all Warnings on this equipment.
- Children must not be let on or near to this equipment. Moving parts and other features of the equipment can be dangerous to children.
- Not intended for use by anyone under 14 years of age.
- Not intended for use by persons with medical conditions where those conditions may impact the safe operation of the equipment or pose a risk of injury to the user.
- Consult a physician before starting an exercise program. Stop exercising if you feel pain or tightness in your chest, become short of breath, or feel faint. Contact your doctor before using the equipment again.
- Examine this equipment for loose parts or signs of wear. Tighten or replace any worn or loose components before use. Examine all fasteners carefully. Contact your local distributor for repair information.
- This equipment is for home use only.
- Set up and operate stand on a hard, level surface.
- Keep at least 1.3 m (50 in) clear on each side of the stand. This is the recommended safe distance for access and passage around the stand.
- Keep third parties out of this area when the device is in use.
- Do not stand, sit or climb on this device.
- Read and understand the complete user guide. Keep manual for future reference.
- Read and understand all warnings on this device. If at any time the warning stickers become loose, unreadable or dislodged, contact your local distributor for replacement stickers.
- Children must not be allowed on or near to this device.
To register your product warranty, go to: www.bowflex.com/register or call 1 (800) 605–3369.
If you have questions or problems with your product, please call 1 (800) 605–3369, or go to: www.bowflex.com.
Documents / Resources
References
Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Bowflex SelectTech Stand Manual
Need help?
Do you have a question about the SelectTech Stand and is the answer not in the manual?
Questions and answers