NOTES Thank you for purchasing this Goodway Tube Cleaning System. We appreciate your business and look forward to serving you in the future. As with all Goodway products, you can be assured that the finest quality components and workmanship have gone into this machine.
WARNING IMPORTANT SAFETY INSTRUCTIONS WARNING: When using this product basic precautions should always be followed, including: Read all the instructions before using the product. To reduce the risk of injury, close supervision is necessary when a product is used near children. Know how to stop the product and bleed pressures quickly.
20 pounds per square inch (PSI) (1,4 BAR) and 70 PSI (4,8 BAR) is required for proper operation. Use the hoses supplied with the unit or contact Goodway for replacements. Failure to use proper hoses can result in damage to the pump, and loosening or breakage of rigid piping.
Page 5
“heaters” in the motor starter must be changed. See exploded view for heaters' part numbers. Leakage Check pump and entire plumbing system for water leaks. Repair all leaks before operating the system. Contact Goodway’s Customer Service if leaks cannot be resolved. CAUTION: Disconnect electrical power before servicing this equipment. Setting Outlet Pressure Turn pump on, outlet pressure should read 325 –...
MACHINE SPECIFICATION SPECIFICATIONS BFP-3510 Motor Power 10 HP (7,5 kW) Input Power Standard: 26 amps, 230V, 50/60 Hz AC, three phase Optional: 13 amps, 460V, 50/60 Hz, three phase; or 12 amps, 380V, 50/60 Hz, three phase Power Supply Cord 25’, 12-4 (7,3 m) Water Requirements 20-70 PSI at 35 GPM (1,4 to 4,8 BAR at...
Need help?
Do you have a question about the BIG SHOT BFP-3510 and is the answer not in the manual?
Questions and answers