Goodway Hi-Flo CC-400HF Operating And Maintenance Instructions Manual

Goodway Hi-Flo CC-400HF Operating And Maintenance Instructions Manual

Coil cleaner
Hide thumbs Also See for Hi-Flo CC-400HF:

Advertisement

Quick Links

CC-400HF
Hi-Flo®
COIL CLEANER
Operating and
Maintenance
Instructions
Read before operating.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Hi-Flo CC-400HF and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Goodway Hi-Flo CC-400HF

  • Page 1 CC-400HF Hi-Flo® COIL CLEANER Operating and Maintenance Instructions Read before operating.
  • Page 2: Table Of Contents

    Thank you for purchasing Goodway’s CC-400-HF Hi-Flo® Coil Cleaner. We appreciate your business and look forward to serving you in the future. As with all Goodway products, you can be assured that the finest quality components and workmanship have gone into this machine.
  • Page 3: Important Safety Instruction

    Wear rubber gloves, rubber boots, goggles or face-shield, etc. Coil Cleaning detergents, chemicals, and debris may cause injuries to the eyes and skin. 10. Call Goodway to check compatibility before using any chemical in the unit - DO NOT use any cleaner that contains sodium hydroxide or potassium hydroxide. Do not mix chemicals.
  • Page 4: Electrical Precautions

    16. The unit is equipped with an automatic by-pass valve that recirculates water inside the pump when the spray gun trigger is released. Although the unit has a thermal discharge valve for protection, avoid leaving the unit running in by-pass mode for more than five (5) minutes.
  • Page 5: Operating Instructions

    Operating Instructions Unwrap hose from unit. Attach to quick connect on output of pump. Attach Spray Gun to quick connect on hose (attach Extension Lance if necessary). Unwrap power cord from unit. Plug into outlet. Test and reset GFCI. Attach water supply hose to unit (3 gallons per minute minimum). Make sure screen washer is in place.
  • Page 6: General Maintenance And Storage

    General Maintenance and Storage If using with cleaning chemicals, run clean water through the pump when done. Periodically check oil level in pump sight glass. Use only approved oil to top off if below dot in sight glass. IMPORTANT!! Replace water seals immediately if pump leaks between head and crankcase.
  • Page 7: Exploded View

    Exploded View CC-400HF HI-FLO 0121...
  • Page 8 Part Number Description QTY. RCC-15-1 Switch, 1.5 hp Max Screw, 1/4-20 panhead, 3/4" L HOSE CONNECTOR Romex Fitting GFCI, 115V Hose, Braided, 1/4' ID 1039 Tip, For Siphon Hose 2509 Grommet, 1/2 ID 9008 Foot 9527 Quick Connect, Female, 3/8 BSL-45EL50FX50M Brass Elbow, 45 degree, 1/2M x F HWN-37L...
  • Page 9 Chemical Hose Lift by handle only ON/ OFF Switch DO NOT LAY UNIT DO NOT LIFT OR DOWN ON THIS END CARRY BY PUMP GUARD!!! Hoist point Hoist Thermal Relief point Valve CC-400HF HI-FLO 0121...
  • Page 10 NOTES CC-400HF HI-FLO 0121...
  • Page 11 NOTES CC-400HF HI-FLO 0121...
  • Page 12 Email: goodway@goodway.com Visit: www.goodway.com P/N:MNL-CC400 ©Copyright 2020 Goodway Technologies Corp., Stamford, CT USA Effective date January 12, 2021 Goodway is a Trademark of Crossford International. Goodway reserves the right to improve products; contact the factory for the latest configuration and uses.

Table of Contents