1. Manuals
  2. Brands
  3. Aeotec Manuals
  4. Security Sensors
  5. MultiSensor 7
  6. User manual

Aeotec MultiSensor 7 User Manual

Hide thumbs Also See for MultiSensor 7:

Advertisement

Table of Contents

08/05/2025, 09:35
MultiSensor 7 user guide
Modified on: Tue, 1 Oct, 2024 at 12:48 AM
Aeotec MultiSensor 7 was developed to detect ambient values and movement
and to transmit them with
powered by Aeotec's Gen7
technology. You can find out more about MultiSensor 7
gen7.html)
(https://aeotec.com/z-wave-sensor/)
To see whether MultiSensor 7 is known to be compatible with your Z-Wave
system or not, please reference our
(http://aeotec.com/z-wave-gateways)
MultiSensor 7
be viewed at that link.
Other languages:
Handbuch in Deutsch
=
a
g
l
n
D E
https://aeotec.freshdesk.com/support/solutions/articles/6000232605-multisensor-7-user-guide
Z-Wave Plus
(https://aeotec.com/z-wave-home-automation/z-wave-
(https://aeotec.freshdesk.com/a/solutions/articles/6000246153)
(
h
Z W
&
=
0 2 4 &
k
s
u
A E O E
A
MultiSensor 7 user guide : Aeotec Help Desk
(http://aeotec.com/z-wave-plus)
by following that link.
Z-Wave gateway comparison
listing. The technical
: / /
.
a
a
t t p s
m
n u
l
z w
Z
=
1 2 - 2 0 1 2 0 1 4 7 )
c e
r t
C
specifications of
.
/
/
a
e
e
b a c k e
d
v
u
n
m
. It is
can
.
?
a k e
h
p
p
1/15

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MultiSensor 7 and is the answer not in the manual?

Questions and answers

Related Manuals for Aeotec MultiSensor 7

Summary of Contents for Aeotec MultiSensor 7

  • Page 1 You can find out more about MultiSensor 7 gen7.html) by following that link. (https://aeotec.com/z-wave-sensor/) To see whether MultiSensor 7 is known to be compatible with your Z-Wave Z-Wave gateway comparison system or not, please reference our specifications of listing. The technical (http://aeotec.com/z-wave-gateways)
  • Page 2 08/05/2025, 09:35 MultiSensor 7 user guide : Aeotec Help Desk Get to Know your MultiSensor. Your MultiSensor comes packaged with a number of accessories that will help with its installation and operation. Package Contents: 1. MultiSensor 2. Battery Cover 3. Double-Sided Tape 4.

  • Page 3: Button Functions

    08/05/2025, 09:35 MultiSensor 7 user guide : Aeotec Help Desk Button Functions. Action button LED Status Function press Pair Mode 1x Tap (when Solid Yellow Enters Z-Wave pair mode, flashes factory reset) white/green 4 times within 2 seconds upon success.
  • Page 4 08/05/2025, 09:35 MultiSensor 7 user guide : Aeotec Help Desk Press and hold [1, 2 No LED seconds) Quick Wakeup LED will disappear as soon as you Press and hold [2, 5 release its button. The MultiSensor 7 Solid seconds)

  • Page 5: Important Safety Information

    08/05/2025, 09:35 MultiSensor 7 user guide : Aeotec Help Desk Communication Health Test (Direct gateway communication - does not test through repeaters). This will test your MultiSensor 7 direct communication to your Z- Wave Controller. It will remain Cyan while it is testing.

  • Page 6: Quick Start

    MultiSensor 7 is intended for use in dry locations only. Do not use in damp, moist, and/or wet locations. ...
  • Page 7 3. Insert the larger end of the USB cable into a computer or any 5V adapter which will immediately power your MultiSensor 7.  4. Make sure to seat the Battery Cover back onto the MultiSensor 7 and lock it in by sliding the Unlock button RIGHT.
  • Page 8 (half the expected battery life).  WARNING: Not compatible with rechargeable CR123A batteries (3.6V). 3. Make sure to seat the Battery Cover back onto the MultiSensor 7 and lock it in by sliding the Unlock button RIGHT. https://aeotec.freshdesk.com/support/solutions/articles/6000232605-multisensor-7-user-guide 8/15...
  • Page 9 Connect MultiSensor 7 to a hub.   This section will go over brief steps to connecting MultiSensor 7, for further details on connecting this product to your hub, click on the hub that you have to access more detailed steps.  ...
  • Page 10 Tap the MultiSensor 7 Action button to pair it.  5. SmartStart QR code scanning: a. If your Z-Wave gateway supports SmartStart, you can scan the QR code on the MultiSensor 7 to automatically pair the sensor if your Z-Wave hub supports this. 6. For most other hubs: a.

  • Page 11: Advanced Functions

    Placement Considerations.   There are some placement considerations when using the Multisensor 7 as a motion sensor. Above are some diagrams that show the distance at which the wall or ceiling installations can perform based on the height they are installed at and at the angle.
  • Page 12 You may need to refer to your gateway's method of including devices if you do not know how to pair a Z-Wave device. You may use any gateway to perform an unpair/removal on MultiSensor 7 even if they are not paired together to factory reset MultiSensor 7.
  • Page 13 Waking up MultiSensor 7. In order to configure Multisensor 7, you must either (1) wake up Multisensor 7 using the below button press function, or (2) temporarily put your Multisensor 7 on USB power. ...
  • Page 14 1-3 again, then power up your hub again. 4. Tap the Action Button on Multisensor 7 to put Multisensor 7 back to sleep, or wait 5 minutes. (recommended to manually put it back to sleep to conserve battery life).
  • Page 15 08/05/2025, 09:35 MultiSensor 7 user guide : Aeotec Help Desk https://aeotec.freshdesk.com/support/solutions/articles/6000232605-multisensor-7-user-guide 15/15...

Table of Contents