Advertisement
Advertisement
Table of Contents
Related Manuals for ProStart JPC7200L
Summary of Contents for ProStart JPC7200L
- Page 1 PROFESSIONAL JUMPSTARTER...
-
Page 2: Specification
SPECIFICATION JPC7200L Model BATTERY 2 x 12V 60AH Battery Capacity Lithium Batteries 1,400 CCA Cold Cranking Amps (CCA) 9000A 12V / 9000A 24V Battery Short Circuit Max 2,000A Current Clamp Output Safe Guarder Protection including Auto Reset Circuit Breaker Overload / Over Discharge Protection... -
Page 3: Important Safety Information
JPC7200L JUMP STARTER IMPORTANT SAFETY INFORMATION Please read this manual thoroughly before use and store in a safe place for future reference. This manual contains important safety instructions. To ensure the product a longer life and more efficient, please note: ... -
Page 4: Operational Instructions
OPERATIONAL INSTRUCTIONS 1. JUMP STARTING Turn ignition off before making cable connections. Make sure the power switch is on the OFF position until clamps are connected to the vehicle battery. Connect POSITIVE (RED) clamp to POSITIVE (POS, P, +) ungrounded post of battery. -
Page 5: Override Function
5. OVERRIDE FUNCTION 12V: when external battery voltage is 0-6V the Jump starter will not switch to jump starting mode. Override function can be applied. 24V: when external battery voltage is 0-15V the Jump starter will not switch to jump starting mode. -
Page 6: Warranty Statement
WARRANTY STATEMENT APPLICABLE ONLY TO PRODUCTS SOLD IN AUSTRALIA Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Need help?
Do you have a question about the JPC7200L and is the answer not in the manual?
Questions and answers