1. Manuals
  2. Brands
  3. ProStart Manuals
  4. Remote Starter
  5. CT-3271
  6. User manual

ProStart CT-3271 User Manual

Manual / automatic transmission multi‐channel  remote starter system
Hide thumbs Also See for CT-3271:
Table of Contents

Advertisement

Quick Links

See also: Installation Manual
MANUAL / AUTOMATIC TRANSMISSION MULTI‐CHANNEL 
INDUSTRY CANADA USER NOTICE:
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause undesired operation of the
device.
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that
the equivalent isotropically radiated power (EIRP) is not more than that required for successful
communication.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications could void the user's authority to operate the equipment.
Doc#: 110530
Rev: 1.3
REMOTE STARTER SYSTEM 
CT-3271
User Guide
It is the responsibility of the vehicle operator to ensure their
vehicle is parked in a safe and responsible manner.
1. a) Manual transmission: When leaving the vehicle, it is the user's
responsibility to ensure that the gearshift lever is in the NEUTRAL
position and the parking brake is engaged in order to avoid accidents
upon remote starting.
b) Automatic transmission: When leaving the vehicle, it is the
user's responsibility to ensure that the gearshift lever is in "Park" in
order to avoid accidents upon remote starting.
(Note: Make sure that the automatic vehicle cannot start in "Drive".)
2. It is the user's responsibility to ensure that the remote starter is
disabled or put into valet mode before servicing.
© 2011
WARNING!
CT-3271
-FcN-
Canada

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CT-3271 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for ProStart CT-3271

Summary of Contents for ProStart CT-3271

  • Page 1 MANUAL / AUTOMATIC TRANSMISSION MULTI‐CHANNEL  REMOTE STARTER SYSTEM  CT-3271 User Guide WARNING! It is the responsibility of the vehicle operator to ensure their vehicle is parked in a safe and responsible manner. 1. a) Manual transmission: When leaving the vehicle, it is the user’s responsibility to ensure that the gearshift lever is in the NEUTRAL position and the parking brake is engaged in order to avoid accidents upon remote starting.

  • Page 2: Table Of Contents

    Passive or Active Arming ....................... 9   Engine Run Time ........................... 9   Turbo Mode ............................ 9   Horn Confirmation: ........................10   POOR TRANSMITTING RANGE ISSUES..................10   PARKING LIGHT FLASH TABLE ....................11   PROSTART LIMITED LIFETIME WARRANTY ................12   User Guide...

  • Page 3: Introduction

    Introduction This is a state-of-the-art remote car starter system. The system is packed with advanced features such as priority access to the driver’s door (commodity features), the Safe Start children safety feature and SmartStart™. SmartStart™ is a groundbreaking technology that enables your remote starter features to be accessed by your smartphone.

  • Page 4: Windshield Wipers, Radio & Headlights

    Windshield Wipers, Radio & Headlights  Certain vehicles require the radio and / or windshield wipers and / or headlights circuits to become energized while running under remote start. When leaving the vehicle you must ensure that the windshield wipers and headlights switches are OFF. Leaving the headlights switch ON on certain types of vehicles could cause them to remain ON even after remote starter shutdown, resulting in a dead battery.

  • Page 5: Driving Off

    If your vehicle has an automatic transmission and it does not start at the first attempt, the system will shut down, wait a few seconds and try to start the engine again. There will be 3 start attempts before the system gives up. Driving Off ...

  • Page 6: Remote Starter Features

    Active Mode: To arm the Starter Kill, press the button on the transmitter. The parking lights will flash once. The LED on the antenna will flash slowly. To disarm the Starter Kill, press the button on the transmitter. The parking lights will flash twice. The LED on the antenna will remain OFF.

  • Page 7: Valet Mode

    If your vehicle has a manual transmission, Idle Mode can be activated through the same routine as that used for Ready Mode (page-4); for the last step, the buttons & are pressed together to lock the doors and leave the engine running. Note1: The engine will continue running until the user re-enters the vehicle or until the expiration of the engine run time.

  • Page 8: Panic Mode

    • Press and hold the button for at least 3 seconds until the parking lights will flash for 2 seconds, pause, and then flash three (3) times. • was programmed as LOCK & UNLOCK by your installer, press and hold the button for at least 3 seconds until the parking lights will flash for 2 seconds, pause, and then flash three (3) times.

  • Page 9: Advanced Features: Installation-Programmable Options

    Advanced Features: Installation- programmable Options The Remote Car Starter was designed with flexibility and OEM integration in mind. With its programmable options, this unit can single-handedly control nearly any electrical system in your vehicle. Caution : The programming of your system should be left to a professional. Changing any one of the settings may affect the operation of your Remote Car Starter.

  • Page 10: Horn Confirmation

    With the engine running, make sure to release the brake pedal and press the on the transmitter until the parking lights come ON. Remove the ignition key from the ignition switch. The engine will continue running. Exit the vehicle and close all doors, hood and trunk. Press the &...

  • Page 11: Parking Light Flash Table

    Parking Light Flash Table Parking lights flashes Description • Doors locked. • Trunk released. • Start signal received from the remote. • Runtime has expired • Doors unlocked 2 fast • Valet mode is deactivated 2 slow • Shutdown by remote •...

  • Page 12: Prostart Limited Lifetime Warranty

    (only) and a copy of the proof of purchase, freight prepaid, along with their name, address and telephone number, to the PROSTART SERVICE CENTER for the exchange to take place. MODULES RETURNED TO THE POINT OF PURCHASE AFTER THE ONE-YEAR REPLACEMENT PERIOD WILL NOT BE ACCEPTED. A module will be returned to the consumer, freight collect, within 4 weeks of receipt of the module.

Table of Contents